Pull Start - Honda, 4.5HP - 6.5HP, GX120, GX160, GX200, Red Color

This pull start / recoil starter assembly with steel plate rachet is typically found in the Recoil Starter(1) section of several part manuals. Commonly used for but not limited to 4HP (GX120) / / 5.5HP (GX160) / 6.5HP (GX200), 120cc, 160cc, and 200cc horizontal engines with VIN numbers GC01-2000001-4299999, GC01-4300001-9099999, GC01-4300001, GC02-8670001-9099999, GCAAT-1000001-9999999, GCAAH-1000001-9999999, and GC02-2000001-8669999. It is most popularly known for its use in:

Honda GX120K1

Type AR / Type L1 / Type Q1 / Type QMX2 / Type QMX2/A / Type QTC2 / Type QX/A / Type QXG / Type QXG2 / Type QXQ / Type QXS / Type QXS2 / Type QXS2/A / Type RX / Type RX/A / Type S1 / Type SW2 / Type SX /Type SX/A / Type TX2 / Type UX / / Type VPM4 / Type VME2 / Type WD12 / Type WME2,

Honda GX120T

SG24 / TX2,

Honda GX160H1 QX2,

Honda GX160K1

Type HG1 / Type PX / Type QMX2/A Type QX/A / Type QX2 / Type RD / Type RXE2 / / Type SM12 / Type SM12 / Type SX / Type TX/A / Type VED2 / Type VG24 / Type VPM5 / Type VX / Type VX2 / Type VXW2 / Type VXW2/A / Type WKT2 / Type WKT2/A / Type WME2 / Type W1,

Honda GX160T1

Type VA2 / Type QWX2 / Type VWA2 / Type VXW2,

Honda GX200

Type QAB2 / Type SM12 / Type SM12/A / Type SM22 / Type VA2 / Type VGG2 / Type VSD2 / Type VSD2/A / Type VX / Type VX/A / Type VX2 / Type VX2/A / V Type XP / Type VXP/A / Type VX2,

Honda F401K2

Type A / Type A2 / Type AC / Type AC/A / Type AC2,

Honda F501K2

Type A1 / Type A2 / Type AC1 / Type AC1/A / Type AC2,

Honda FR600

Type A / Type AC/A / Type AC/B / Type AC/C

Honda FR660 Type AC,

Honda FR7500

Type AC, Type AC/A,

Honda WB20XK1

Type AC1 / Type C1,

Honda WB30XK1

Type AC1 / Type C1,

Honda WD30XK1

Type AC1 / Type AC1/A / Type C1 / Type C1/A,

Honda WDP20X Type A ,

Honda WDP20XT Type A,

Honda WDP30X Type A,

Honda WDP30XT Type A,

Honda WH15XK1

Type AC1 / Type AC1/A,

Honda WH20XK1

Type AC1 / Type AC1/A,

Honda WMP20X Type A1

Honda WP20X

Type ACF6 / Type ACF6/A,

Honda WP30X

Type ACF6 / Type ACF6/A,

Honda WT20XK2 Type AC,

Honda WT20XK3

Type AC / Type AC/A ,

Honda F501K2

Type A1 / Type A2 / Type AC1 / Type AC1/A / Type AC2,

Honda FR600

Type A / Type AC/A / Type AC/B / Type AC/C,

Honda FR650 Type AC,

Honda FR750

Type AC / Type AC/A,

as well as many other brands of ATVs, UTVs (side-by-side), dirt bikes, scooters, go karts (buggies), and engines with alternative profile names. Direct pullstart replacement for models up-to and exceeding the GX200 engines etc. This pull start works on our engines 10A9000 and 10A9005.

Honda Part Code: 4193033/7346810

Approximate Dimensions of the Pull Start:

• Diameter: 17.4cm (6.85”)
• Width: 3.75cm (1.48”)
• Mounting Holes (center to center across): 160mm (6.30”)
• Mounting Holes Diameter: 6.5mm (0.26”)
• Color: Red Color
• Metal Pawl Type: Round

Manufacturer Part Numbers:

• Honda Part Number: 28400-ZH8-013YA “STARTER ASSY. RECOIL (R280)” or “STARTER ASSY., RECOIL *R280*..............POWER RED"
• Rotary Part Number: 2079 Recoil Starter Assembly
• Prime Line Part Number: 7-03424 Recoil Starter Assembly
• Oregon Part Numbers: 31-052, 31-075, 31-059 Recoil Starter Assembly
• Sunbelt Part Number: B1HD0008 Recoil Starter Assembly
• J. Thomas Part Number: HO-1946 Recoil Starter Assembly
• Dealer Choice Part Number: 78-3020 Recoil Starter Assembly
• Napa Part Number: 7-03424 Recoil Starter Assembly
• NHC Part Number: 269-5256 Recoil Starter Assembly
• Stens Part Number: 150-703 Recoil Starter Assembly
• Laser part Number: 97292 Recoil Starter Assembly
• GHS Part Number: 1270 Recoil Starter Assembly

Replaces Part Number:

Honda Part Numbers:

• 28400-ZE1-003ZA
• 28400-ZE8-013ZA
• 28400ZE8509
• 28400-ZE8-811H
• 28400ZE8811ZA
• 28400-ZE8-811ZG
• 28400-ZH8-013YA
• 28400-ZH8-023YA
• 28400-ZH8-003YA
• 28400-ZH8-33YA
• 28400-ZH8-013ZA
• 28400-ZH8-023ZB
• 28400-ZE3-W01ZA
• 28400-ZE3-W01ZP

Oregon Part Number: 31-052 Recoil Start Assembly

These categories serve as labels for sorting products. See our FAQ for more details.

This part is not guaranteed to work with these machines. See our FAQ for more details.