Starter Gear - Intermediate Gear, 67T, ATV, Hisun, 500-700cc
Starter gear / intermediate gear. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
Driven Gear - Double Gear, 44T/31T, ATV, Hisun, 500-700cc
Balance shaft assembly driven gear. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
Starter Gear - Double Gear, 54T/13T, Honda, Kymco, CF Moto, Hammerhead, Baja, 172MM, 250cc, 172MM
This secondary starter gear / double gear (54 teeth, 13 teeth) is typically found in Electrical Starting Assy / Electric Starter / Starter Motor / Electrical Start [More Info]
Gear -  37 Teeth, 19 Splines, Honda, CF Moto, Hammerhead, Baja, 172MM, 250cc
This gear with 37 teeth and 19 splines is commonly used for but not limited to liquid cooled CN250 / CF250 / 250cc engines. It is most popularly known for its use in Honda Helix / Spazio / Fusion CN250, CF Moto 172MM / 172MM-A / 172MM-B / 172MM-C [More Info]
Starter Gear - CG125, CG150, CG200, CG250
Starter Gear commonly (thought not exclusively) used on CG125, CG150, CG200 and CG250 engine types. [More Info]
Starter Gear - Disk Assembly, Crankcase, ATV, 800cc, Hisun
This Starter Disk Gear Assembly is used for a wide displacement range of ATVs. Most popularly applies to 800cc ATVs from companies like Hisun (HSUN). [More Info]
Starter Gear - CG125, CG150, CG200, CG250
Starter Gear commonly (thought not exclusively) used on CG125, CG150, CG200 and CG250 engine types. [More Info]
Starter Gear - 125cc to 150cc, Vertical Engine, 57 Tooth
Starter Gear - 125cc to 150cc, Vertical Engine, 57 Tooth. This gear has a diameter of 11.8cm and thickness of 4.9mm. Centre hole is 2.2cm. [More Info]
Starter Gear - 50cc to 300cc, 41 Tooth
Starter Gear 50cc to 300cc, 41 Tooth. Gear is especially for (but not exclusively)electric start ATVs and kick start dirt bike engines 50cc to 250cc. [More Info]
Starter Reduction Gear - 500cc, 550cc EFI, Buyang, Feishen, Gio, Chironex
Starter reduction gear, also referred to as 'starter reducer' and 'output gear'. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI [More Info]
Starter Gear - Double Gear, 49T/11T, UTV, Odes, 800cc
This starter gear / double gear is commonly used for a wide range of ATVs and UTVs. Most popularly applies to the Odes and Kangdi (Kandi) 800cc UTVs. [More Info]
Starter Gear - Intermediate Gear, 30T, UTV, Odes, 800cc
This starter gear / intermediate gear is commonly used for a wide range of ATVs and UTVs. Most popularly applies to the Odes and Kangdi (Kandi) 800cc UTVs. [More Info]
Reduction Gear - 49 Teeth, Buyang, Chironex, Stels, 300cc

This 49-tooth reduction gear is typically found in the Starter / Water Pump section of several part manuals. Commonly used for but not limited to 300cc engines. [More Info]

Drive Gear - 500cc, 550cc, Buyang, Feishen, Gio, Chironex
Drive gear for 500cc, 550cc EFI (Electronic Fuel Injected) ATVs. Most commonly used for (but not limited to) Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV as well as many other clones, rebrands and similar [More Info]
Starter Gear - Double Gear, 58T/19T, Hisun, 400cc, ATV/UTV
Starter gear / double gear. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs and Hisun 400cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
Starter Gear - Double Gear, 40T/15T, ATV, Hisun, 500-700cc
Starter gear / double gear. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]