Starter relay aka starter solenoid for 500cc, 550cc EFI (Electronic Fuel Injected) ATVs. This relay operates in the same way as other non-fuse based relays and [More Info]
Round (cylindrical) 3 wire flasher relay (turn signal relay, aka blinker relay). This relay commonly applies to (and is not limited to) 49cc to 300cc ATVs, dirt bikes, go karts/buggies, golf carts, scooters as well as other powersports, recreational [More Info]
This starter relay applies to (and is not limited to) 150cc to 400cc engines. Most commonly used for 260cc and 300cc ATVs, dirt bikes, scooters, buggies and other motorized vehicles from a wide range of manufacturers. [More Info]
Flasher Relay / Turn Signal Relay. Commonly used for (but not limited to) 400cc and 800cc engines, such as the Hisun 400cc and Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
***Note - this starter relay has been replaced at the factory by an updated model, current pictures are not yet updated. Factory maintained the same part number but new version will only work for new machines starting in 2017. [More Info]
Relay assembly. Commonly used for (but not limited to) 400cc and 800cc engines, such as the Hisun 400cc 4x4 ATVs and Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
Cut Out Relay (aka. Cut Out Controller, Shut Down Relay or Power Down Relay) for (but not limited to) the Jianshe 250cc and 400cc ATV as well as many other clones, rebrands and similar displacement machines. [More Info]
This starter relay / starter solenoid / power relay is commonly used for a wide range of powersport and mobility machines including ATVs, dirt bikes, scooters, buggies and gokarts. [More Info]
Shut Down Relay (aka. Cut Out Relay, Shut Down Relay or Power Down Relay) for (but not limited to) the Jianshe 250cc and 400cc ATV as well as many other clones, rebrands and similar displacement machines. [More Info]
Relay boot. Commonly used for (but not limited to) 400cc, 500cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc and Hisun 800cc UTVs as well as many other clones, rebrands and similar displacement machines. [More Info]
Conversion Relay, four to two wheel drive. Commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements [More Info]
Starter relay / Starter solenoid. Most commonly used for (but not limited to) 260cc and 300cc liquid cooled ATV's, UTVs, dirt bikes / pit bikes, scooters, dune buggies, go karts and other similar products. [More Info]
Starter Relay / Starter Solenoid. Commonly used for (but not limited to) 400cc, 500cc and 700cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc 4x4 ATVs and UTVs, as well as many other clones, rebrands and similar displacement [More Info]
Relay boot. Commonly fits many 250cc to 800cc machines. Manufacturer part number 5.3.01.1020. Applies primarily to (but not limited to) Buyang 300cc 4x4 ATV (including sub models FA-H300 and FA-D300), Gio Bear 300cc, Daymak Grunt 300cc, Midwest [More Info]
This starter relay / starter solenoid is used for a wide displacement range of ATVs and UTVs. Most popularly applies to 400cc ATVs and UTVs from companies like Odes and Liangzi. [More Info]
Control Relay / 14V 60/80A. Most commonly used for (but not limited to) 260cc and 300cc liquid cooled ATV's, UTVs, dirt bikes / pit bikes, scooters, dune buggies, go karts and other similar products. [More Info]
4WD relay / 4 wheel drive solenoid. Most commonly used for (but not limited to) 260cc and 300cc liquid cooled ATV's, UTVs, dirt bikes / pit bikes, scooters, dune buggies, go karts and other similar products. [More Info]
Auxilary relay. Commonly used for (but not limited to) 400cc, 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs and Hisun 400cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
Starter Relay - Starter Solenoid, Fuse Based with 2 Fuses. A direct replacement for machines such as the Yamaha YFM250, YFM300, YFM350, YFM400, YFM450 and YFM660 [More Info]
This Starter Relay / Starter Solenoid commonly applies to (and is not limited to) 50cc 70cc 90cc 110cc 125cc 150cc 200cc 250cc up to 500cc electric start engines. [More Info]
This Starter Relay / Starter Solenoid commonly applies to (and is not limited to) 50cc 70cc 90cc 110cc 125cc 150cc 200cc 250cc up to 500cc electric start engines. [More Info]
Relay 3A 12V AG50. This motorcycle relay fits SUZUKI AG50 and other suitable models requiring strong ignition power. Inlet angle stability, stable ignition performance in both high and low speed. [More Info]
Starter relay / Starter solenoid. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs as well as many other clones, rebrands and similar displacement machines. [More Info]
This starter relay / starter solenoid operates the same way as unfused-based relays. Bolt studs are 2cm apart center to center. This component is typically found [More Info]
Round (cylindrical) 3 wire flasher relay (turn signal relay, aka blinker relay). This relay commonly applies to (and is not limited to) 49cc to 300cc ATVs, dirt bikes, go karts/buggies, golf carts, scooters as well as other powersports, recreational [More Info]
Conversion Relay - Four to Two Drive, XY500UE, XY600UE, UTV. This conversion relay is most commonly used for (but not limited to) Chironex Spartan 500cc and 600cc UTVs (4x4/2x4 and similar variations), Xinyang 500cc - 600cc ATVs and UTVs (4x4/2x4 [More Info]
Round (cylindrical) 3 wire flasher relay (turn signal relay, aka blinker relay). This relay commonly applies to (and is not limited to) 49cc to 300cc ATVs, dirt bikes, go karts/buggies, golf carts, scooters as well as other powersports, recreational [More Info]