Negative battery cable. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]

Negative battery cable. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]

Negative battery cable. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]

Negative battery cable. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]

This speed sensor & display cable (connection cable/meter wire) is used for a wide displacement range of ATVs and UTVs. Most popularly applies to 400cc ATVs and UTVs from companies like Odes and Liangzi. [More Info]

1T5 bus cable, 1000mm base cable with 4 way split. Total length from split is 100mm for display, 120mm for front brakes, 120mm for rear brakes, and 250mm for throttle. [More Info]

Charger cable / charger plug, 110V. Direct replacement for SHOK Scooters Neutron, Proton and Graviton kick scooters as well as many other brands and models such as Segway Ninebot Max G30 / G30LP and Xiaomi. [More Info]

This charger plug applies to a wide variety of electric scooters and other machines. Receptacle is a three prong that the scooter charger plugs into. [More Info]

1T5 bus cable, 900mm base cable with 4 way split. Total length from split is 50mm for display, 80mm for front brakes, 80mm for rear brakes, and 250mm for throttle. [More Info]

This charger plug is common (though not exclusively) used for electric scooters in the 150W, 250W, 350W, 500W, 800W range. Popularly for the 350W and 500W Razor electric scooters. [More Info]

1T5 bus cable, 1200mm base cable with 4 way split. Total length from split is 100mm for display, 120mm for front brakes, 120mm for rear brakes, and 250mm for throttle. [More Info]

Electric motor cable, waterproof, 9 pin. Most commonly (though not exclusively) used for the electric motors (built-in wheel hub motors) on E-Bikes and electric scooters. [More Info]

Display cable / instrument panel plug. Direct replacement for SHOK Scooters Triode fat tire trike / 3-wheel electric bike (e-bike) and Nova step-through (step-thru) electric city bike / e-bike as well as many other brands and models in the open [More Info]

Battery / Battery Box cable most commonly (though not exclusively) used for electric scooters and electric bicycles (ebikes). [More Info]

This charger plug applies to a wide variety of electric scooters and other machines. Three prong charger receptacle. Total wire length including plug is 80cm. [More Info]

This charger plug applies to a wide variety of electric scooters and other machines. Receptacle is a three prong that the scooter charger plugs into. [More Info]

This charger plug is common (though not exclusively) used for electric scooters in the 150W, 250W, 350W, 500W, 800W range. Voltage is rated for 12V, 24V and 36V. [More Info]

Battery / Battery Box cable most commonly (though not exclusively) used for electric scooters and electric bicycles (ebikes). [More Info]

12V auxiliary DC socket. Commonly used for (but not limited to) 400cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 700cc and Hisun 800cc 4x4 ATVs and Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement [More Info]

High voltage cable. Commonly used for (but not limited to) 400cc and 800cc engines, such as the Hisun 400cc and Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]