20A9302
$21.99
This intake manifold is designed to work with 30mm carburetors in 4-stroke machines. It will fit many 200-250cc engines in ATVs, Dirt Bikes, and Scooters. [More Info]
20A9320
$21.99
Intake CG125 Configuration. Opening is 27.3mm, mounting holes are 6.2cm apart and the bolt studs are 4.8cm apart center to center [More Info]
20A9151
$23.99
This 15mm aluminum intake manifold is designed for performance and fits almost any 2-stroke air cooled ATV, Dirt Bike, Pocket Bike, & Mini Quad up to 49cc. [More Info]
20A9325
$21.99
Intake CG150 Configuration. Opening is 28.2mm, mounting holes are 6.2cm apart and the bolt studs are 4.8cm apart center to center
[More Info]
20A9152
$24.99
This 15mm aluminum intake manifold & gasket set is designed for performance and fits almost any 2-stroke air cooled ATV, Dirt Bike, Pocket Bike, & Mini Quad up to 49cc. [More Info]
20A9330
$21.99
Intake CG200 Configuration. Opening is 30mm, mounting holes are 6.2cm apart and the bolt studs are 4.8cm apart center to center
[More Info]
20A9161
$26.99
This 15mm aluminum intake manifold & gasket set is designed for performance and fits almost any 2-stroke ATV, Dirt Bike, Pocket Bike, & Mini Quad up to 49cc. [More Info]
20A9190
$26.99
This intake manifold is designed to work with 19mm carburetors in 4-stroke machines. It will fit many 50cc to 110cc engines in ATVs, Dirt Bikes, and Scooters. [More Info]
20P9155
$18.99
This 15mm plastic intake manifold set is designed to fit almost any 2-stroke ATV, Dirt Bike, Pocket Bike, & Mini Quad up to 49cc. Also used for some 2-stroke scooters and smaller buggies/go-karts. [More Info]
20A9308
$31.99
Intake - Yamaha PW50 [More Info]
20P9153
$18.99
This 15mm plastic intake manifold set is designed to fit almost any 2-stroke ATV, Dirt Bike, Pocket Bike, & Mini Quad up to 49cc. Also used for some 2-stroke scooters and smaller buggies/go-karts. [More Info]
30A5200
$13.99
Intake Manifold Gasket 3 piece set. Includes one plastic gasket, one paper gasket, and one rubber O ring. It is most commonly used for 125cc Electric Start and Kick Start Engines. [More Info]
30A5224
$12.99
Intake Manifold Gasket 2 piece set. It is most commonly used for (and not limited to) GY6 style 150cc ATV, Dirt Bike, and Scooter engines. Includes one plastic gasket and one paper gasket. [More Info]
20A9270
$21.99
This Intake Manifold is 27mm and applies to (but is not limited to) 27mm carburetors. Opening is 27.7mm, mounting holes are 6.2cm apart and the bolt studs are 4. [More Info]
30A5225
$13.99
Intake Manifold Gasket 2 piece set. It is commonly used for (and not limited to) 125cc to 200cc ATV, Dirt Bike, and Scooter engines. Includes one plastic gasket and one paper gasket. [More Info]
30A5235
$9.99
Intake gasket for (but not limited to) 300cc, 400cc, 500cc and 550cc ATVs, UTVs, dirt bikes, scooters, dune buggies, go karts and other powersports/mobility products. [More Info]
20A9300
$21.99
This intake manifold is designed to work with 30mm carburetors in 4-stroke machines. It will fit many 200-250cc engines in ATVs, Dirt Bikes, and Scooters. [More Info]
30A5226
$13.99
Intake Manifold Gasket. It is commonly used for (and not limited to) 200cc to 250cc ATV, Dirt Bike, and Scooter engines. Includes one plastic gasket. [More Info]
30A5253
$4.99
Intake gasket applies to (and is not limited to) 150cc to 400cc engines. Most commonly used for 260cc and 300cc ATVs, dirt bikes, scooters, buggies and other motorized vehicles from a wide range of manufacturers. [More Info]
20P9150
$16.99
This is a standard plastic intake and gasket for 2-stroke engines. Fits many mini-quads, pocket bikes, and more. Opening is 14.7mm and carburetor mounting holes are 3. [More Info]
Air Filter Seat, intake manifold aka Velocity Stack - Pocket Bike. Aluminum. Outside diameter of 45mm, 18mm centre hole and the mounting holes are 30mm apart centre to centre. [More Info]
60A4095
$29.99
Air intake screen, commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. [More Info]
20A9221
$26.99
This intake manifold is designed to work with 19mm to 22mm carburetors in 4-stroke machines. It will fit many 50cc to 125cc engines in ATVs, Dirt Bikes, or Scooters. [More Info]
Intake Manifold Pipe aka Velocity stack for 2 stroke 33cc-50cc Pocket Bike & Gas Scooter. Plastic. Total outside diameter is 53mm, 26mm centre hole and the mounting holes are 39mm apart centre to centre. [More Info]
20A9353
$99.99
Inlet pipe joint. Commonly used for (but not limited to) 400cc and 500cc engines, such as the Hisun 500cc 4x4 ATVs and Hisun 400cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A9271
$31.99
This intake manifold is designed to work with 26mm to 27mm carburetors in 4-stroke machines. It will fit many 125cc to 200cc engines in ATVs, Dirt Bikes, and Scooters. [More Info]
20A9350
$29.99
This intake manifold is most commonly (but most exclusively) used for GY6 50cc Engines. This engine is most commonly used for 50cc gas scooters, as well as smaller dirt bikes, ATVs and buggies / go karts. [More Info]
20A9342
$79.99
This intake manifold is most commonly (but most exclusively) used for the Jianshe 400cc JS400 ATV. Corresponding O-ring (F3-700601-0) is our part number 20A5772. [More Info]
20A9191
$26.99
This intake manifold is designed to work with 19mm carburetors in 4-stroke machines. It will fit many 50cc to 110cc engines in ATVs, Dirt Bikes, and Scooters. [More Info]
20A9351
$26.99
This intake manifold is most commonly (but most exclusively) used for GY6 125cc and 150cc Engines. This engine is most commonly used for 150cc gas scooters, ATVs and buggies / go karts. [More Info]
20A9360
$31.99
This carburetor intake manifold is typically found in the Cylinder Head Assy / Cylinder Cover Assy (2) / Cylinder Head Comp. section of several part manuals. [More Info]
20A9301
$31.99
This intake manifold is designed to work with 30mm carburetors in 4-stroke machines. It will fit many 200cc to 250cc engines in ATVs, Dirt Bikes, and Scooters. [More Info]
20A9352
$29.99
This intake manifold is most commonly (but most exclusively) used for GY6 Engines, most commonly for CF Moto and similar brand machines. This engine is most commonly used gas scooters, as well as dirt bikes, ATVs and buggies / go karts etc. [More Info]
20A9333
$44.99
Intake pipe. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the world. [More Info]
20A9192
$24.99
This intake manifold is designed to work with 19mm carburetors in 4-stroke machines. It will fit many 50cc to 110cc engines in ATVs, Dirt Bikes, and Scooters. [More Info]
20A9305
$31.99
Intake - 22 mm Standard Configuration. Opening is 22.1mm, the mounting holes are 4.8mm and 4.5mm apart centre to centre respectively. [More Info]
20A9223
$31.99
Intake manifold, 25mm. Most commonly (though not exclusively) used for 50cc, 70cc, 90cc, 110cc, 125cc and 150cc ATVs, dirt bikes, go karts / buggies, scooters and other motorized products with 19mm to 26mm carburetors. [More Info]
20A9193
$24.99
This intake manifold is designed to work with 19mm carburetors in 4-stroke machines. It will fit many 50cc to 110cc engines in ATVs, Dirt Bikes, and Scooters. [More Info]
20A9310
$21.99
Intake CB125 configuration. Opening is 27.1mm, mounting holes are 6.2cm apart and the bolt studs are 4.8cm apart center to center [More Info]
This intake manifold (aka joint carburetor) is typically found in Cylinder Head or Cylinder Head Sub Assembly section of several part manuals. [More Info]
20A9222
$26.99
This intake manifold is designed to work with 19mm to 25mm carburetors in 4 stroke machines. It will fit many 50cc to 150cc engines in ATVs, Dirt Bikes, and Scooters. [More Info]
20A9315
$21.99
Intake JH125 Configuration. Opening is 27.3mm, mounting holes are 6.2cm apart and the bolt studs are 4.8cm apart center to center. [More Info]