Actuation switch, left hand side. Most commonly used for (but not limited to) 50cc to 300cc ATVs, Dirt Bikes, buggies and scooters. This switch has a large variety of uses though primarily used with a brake lever in order to actuate the brake [More Info]
10A8010
$24.99
Switch - Scooter, Horn, Turn Signal, Headlight [More Info]
10A8817
$25.99
Rear brake cable switch used to activate brake lights. This brake light switch is most commonly (but not exclusively) used for 400cc ATVs and UTVs from companies like Odes and Liangzi. [More Info]
10A8070
$24.99
Switch - Scooter, 3 Speed Control Switch [More Info]
10A8132
$139.99
This handle bar mounted switch is often referred to as "instrument switch", "light switch" "starter switch" and many other names. Most commonly (but not exclusively) used for 400cc ATVs from companies like Odes and Liangzi. [More Info]
10A8012
$34.99
Switch - Scooter, Headlight, Lever [More Info]
10A8156
$74.99
10A8150
$84.99
Left handle switch assembly. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner [More Info]
10A8142
$119.99
This handle bar mounted switch is often referred to as "instrument switch", "light switch" "starter switch" and many other names. Most commonly (but not exclusively) used for 400cc ATVs from companies like Odes and Liangzi. [More Info]
10A8140
$74.99
Left switch assembly. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A8816
$34.99
Foot brake light switch, for (but not limited to) 150cc to 400cc ATV's, dirt bikes / pit bikes and scooters. Manufacturer part number 4.3.01. [More Info]
This rear brake light switch is typically found in Brake System / Hydraulic Brake Assy section of several part manuals. Commonly used for but not limited to 400cc, 500cc, 600cc, 625cc, and 800cc engines. [More Info]
10A8000
$24.99
Switch for mini ATV. Switch is 2cm wide and the wire length is 70.5cm. Commonly used for but not limited to 50cc to 250cc ATVs and dirt bikes. [More Info]
10A8130
$39.99
This switch can be used for (but is not limited to) 50-250cc ATVs. Switch is 3.2cm wide and the wire length is 55cm. One 4 pin female connector and 1 3 pin female connector. [More Info]
Brake cable switch that activates the brake lights. Commonly used for (but not limited to) 400cc, 500cc and 800cc engines, such as the Hisun 400cc and Hisun 500cc 4x4 ATVs and Hisun 400cc and Hisun 800cc UTVs, as well as many other clones, rebrands [More Info]
10A8110
$39.99
This switch is commonly used for (but is not limited to) 50cc to 250cc ATV. The total wire length is 90cm.
[More Info]
10A8180
$74.99
Left switch assembly. Commonly used for (but not limited to) 500cc, 700cc and 800cc engines, such as the Hisun 500cc, Hisun 700cc and Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A8100
$34.99
This switch applies to (but is not limited to) 50cc to 250cc ATVs as well as various models of electric and gas scooters. The total wire length is 62cm. [More Info]
10A8131
$59.99
*Note* in 2019 the primary production factory for this part began to produce a slightly different variation that still works with older models. [More Info]
10D8000
$24.99
This kill switch applies to (but is not limited to) 50cc to 250cc dirt bikes. This kill switch also contains an electric start feature, making this module one of the most commonly used for the 50cc, 70cc, 90cc and 110cc dirt bikes with electric [More Info]
10A8155
$64.99
Left switch assembly. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV, Feishen 550cc ATV as well as many other clones, rebrands [More Info]
Actuation switch, right hand side. Most commonly used for (but not limited to) 50cc to 300cc ATVs, Dirt Bikes, buggies and scooters. This switch has a large variety of uses though primarily used with a brake lever in order to actuate the brake [More Info]
10A8812
$59.99
Brake light switch. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the world. [More Info]
10A8810
$19.99
Rear brake cable switch most commonly (though not exclusively) used to activate the brake lights on many variations of smaller ATVs from 50cc to 300cc as well as some dirt bikes, go karts, buggies etc. [More Info]
10A8144
$109.99
Handlebar left switch assembly. Most commonly used for (but not limited to) 400cc ATVs such as the Jianshe JS400 Mountain Lion as well as many other clones, rebrands and similar displacement machines. [More Info]
10A8815
$19.99
Brake cable switch that activates the brake lights for 50cc to 250cc atv's. This cable works with 70A2320 brake lever and throttle assembly. [More Info]
10A8002
$24.99
Switch - Scooter, Horn, Turn Signal, Headlight [More Info]
10A8120
$39.99
This switch applies to (but is not limited to) 50cc to 250cc ATVs as well as various models of electric and gas scooters. The total wire length is 62cm. [More Info]
10A8004
$24.99
Switch - Scooter, Horn, Turn Signal, Headlight [More Info]
10A8825
$44.99
Brake Light Switch - Brake Pedal. This brake light switch is most commonly used for (but not limited to) Chironex Spartan 500cc and 600cc UTVs (4x4/2x4 and similar variations), Xinyang 500cc - 600cc ATVs and UTVs (4x4/2x4 and similar variations).
Common [More Info]
10A8006
$24.99
Switch - Scooter, Horn [More Info]
10A8135
$109.99
This genuine CF Moto left handlebar switch (aka main function switch) is typically found in the Handlebar section of several part manuals. [More Info]
10A8008
$24.99
Switch - Scooter, Horn, Turn Signal, Headlight [More Info]