40A4000
$13.99
This is a fuel shutoff valve / petcock. It bolts to the under-body of the the gas / fuel tank and servers to manually disable the flow of fuel to the carburetor. [More Info]
80P4160
$46.99
16mm 49cc to 125cc carburetors most commonly used for (and not limited to) smaller 4-stroke dirt bikes and mini quads (ATVs). Commonly used as original and replacement carburetor on Tao Tao 110cc ATVs, Tao Tao 125cc ATVs and similar models. [More Info]
20A5910
$4.99
20A4121BK
$24.99
This is a Black aluminum gas tank cap. Standard size fits many ATVs, Dirt Bikes, Scooters, and more. Approximate distance from inside thread to thread is 49mm. [More Info]
20A4800
$39.99
Gas tank. Most commonly (though not exclusively) used for 37cc, 39cc, 47cc and 49cc air cooled 2-stroke pocket bikes, mini bikes and other smaller scale motorized products. [More Info]
20A4122CR
$5.99
Gas Cap Vent Tube - Chrome [More Info]
20A4125CR
$15.99
This fuel tank cap / gas tank cap is typically found in the Fuel Tank section of several part manuals. Commonly used for but not limited to 4HP – 13HP, GX120 / GX160 / GX200 / GX240 / FX270 / GX340 / GX390 engines with VIN numbers G100-3000001 [More Info]
20A5100
$9.99
Fuel line kit primarily (though not exclusively) used for 2-stroke gas bicycle conversion kits. Kit includes fuel filter, gas line and two clamps. [More Info]
20A4182CR
$29.99
30A4542
$64.99
Oil pump, commonly used for (but not limited to) the CF Moto 400cc (CF400) ATV. [More Info]
20A4440
$49.99
Secondary water tank. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
Oil drainage cover (blind nut). Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
This Petcock / Fuel Valve / Fuel Switch applies to (and is not limited to) models. [More Info]
20A5200
$4.99
High flow capacity transparent fuel filter.
These filters hold 2-4 times more filtered material than comparable filters.
Maximum outer diameter of the connections is in approximately 7. [More Info]
80A1120
$59.99
This carburetor profile is most commonly (though not exclusively) used on PW50 Yamaha Pewee 50 models. 12mm intake diameter. Often referred to as 'PZ12J' carburetor type. [More Info]
20A5215
$3.99
Plastic Fuel Filter (gas filter) commonly used on 49cc to 250cc ATVs and dirt bikes. This filter is equipped with a magnetic ring which captures metal particulates that manage to pass through the physical screens. [More Info]
20A4121CR
$24.99
This is a Chrome aluminum gas tank cap. Standard size fits many ATVs, Dirt Bikes, Scooters, and more. Approximate distance from inside thread to thread is 49mm. [More Info]
30A4550
$45.99
This pump is most commonly used for (and not limited to) 200cc to 250cc water cooled engines. [More Info]
20A4122GN
$5.99
Gas Cap Vent Tube - Green [More Info]
This metal gas tank is typically found in the Fuel Tank section of several part manuals. Commonly used for but not limited to 5HP / 5.5HP / 6. [More Info]
20A5100
$9.99
Fuel line kit primarily (though not exclusively) used for 2-stroke gas bicycle conversion kits. Kit includes fuel filter, gas line and two clamps. [More Info]
20D4880
$59.99
Gas tank most commonly (though not exclusively) used for CRF110 dirt bikes and similar profile designs. [More Info]
Gas tank / Fuel tank. Most commonly used for (but not limited to) 260cc and 300cc liquid cooled ATV's, UTVs, dirt bikes / pit bikes, scooters, dune buggies, go karts and other similar products. [More Info]
20A4580
$27.99
Water tank cover. Commonly used for (but not limited to) 400cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 700cc and Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
30A4450
$37.99
Oil pump sprocket. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A5220RD
$12.49
This is a red colour CNC machined anodized aluminum fuel filter (oil filter) that contains a replaceable three phase fabric filter. Ensures steady fuel flow and ultra-high grade filtration. [More Info]
80A2250
$64.99
This 25mm carburetor with manual choke attachment is most commonly used for (but not limited to) 125cc to 250cc ATVs and dirt bikes. Also very commonly used for many models of golf carts and other models of Go karts / buggies and some scooters. [More Info]
20A5205
$3.99
Fuel Filter - Plastic [More Info]
20A4710
$34.99
This gas tank is most commonly used on (but not limited to) 50cc to 125cc ATVs.
This tank is 16cm wide at the widest point, 21cm high including cap & tube (16cm high without cap & tube), and 23cm long without tabs (26cm long including tabs). [More Info]
30A4555
$45.99
This pump is most commonly used for (and not limited to) 200cc to 250cc water cooled engines. [More Info]
80P4165
$46.99
16mm 49cc to 125cc carburetors most commonly used for (and not limited to) 2-stroke pocket bikes, 4-stroke mini-choppers, mini dirt bikes and mini quads (ATVs). [More Info]
40A4060
$21.99
This fuel shutoff valve / petcock is most commonly (but not exclusively) used for 400cc ATVs and UTVs from companies like Odes and Liangzi.
Common Liangzi model names consist of variations of "Liangzi 400cc ATV", "Liangzi 400cc UTV", "Liangzi [More Info]
20A4140BK
$36.99
Gas cap / fuel cap. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
21A0740
$14.99
This oil filter is used for a wide displacement range of ATVs and UTVs. Most popularly applies to 400cc ATVs and UTVs from companies like Odes and Liangzi. [More Info]
80A9990
$4.99
Fuel line clamp, 8mm spring clamps, 4 pieces. [More Info]
20A4581
$19.99
Auxiliary water tank cover. Commonly used for (but not limited to) 500cc, 700cc and 800cc engines, such as the Hisun 500cc, Hisun 700cc and Hisun 800cc 4x4 ATVs and Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement [More Info]
30A4541
$59.99
Oil pump. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs and Hisun 400cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A5230RD
$12.49
This is a red CNC machined anodized aluminum fuel filter (oil filter) that contains a replaceable three phase fabric filter. Ensures steady fuel flow and ultra-high grade filtration. [More Info]
80A6270
$68.99
Carburetor 27mm/35mm cable choke, includes primer to help with cold starts and starting under high moisture conditions.
[More Info]
20A5250SV
$11.99
Glass in-line fuel filters have glass body with chrome end caps. [More Info]
20A4705
$89.99
This gas tank is most commonly (but not exclusively) used on 150cc, 200cc, 250cc and 300cc ATVs. [More Info]
30A4540
$45.99
This pump is most commonly used for (and not limited to) 125cc to 250cc engines. [More Info]
This 19mm/32mm carburetor with manual choke lever and side facing fuel overflow (for front facing overflow refer to part number 80A2196) is most commonly used for (but not limited to) 50cc 70cc 90cc 110cc 125cc and 140cc ATVs and dirt bikes. [More Info]
20A5207
$3.99
Fuel Filter - Plastic, 49cc to 250cc. [More Info]
30A4840
$299.99
Fuel pump / fuel position sensor. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A5282
$24.99
30A4896
$599.99
This fuel pump profile is commonly applicable for many big brand and lesser brand name machines from all over the world. Common format for UTVs in the 300cc to 1100cc range. [More Info]
20A4640
$22.99
Rad cap vent pipe (EPA Rubber Pipe). Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
30A4585
$49.99
Oil pump assembly. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A5220GD
$12.49
This is a gold colour CNC machined anodized aluminum fuel filter (oil filter) that contains a replaceable three phase fabric filter. Ensures steady fuel flow and ultra-high grade filtration. [More Info]
80A3270
$68.99
Carburetor 27mm manual choke, includes primer to help with cold starts and starting under high moisture conditions. This carb has a 35mm breather opening and the mounting holes are 48mm apart center to center. [More Info]
20A5240GD
$12.99
High quality VISUAL FILTER HIGH FLOW/HIGH CAPACITY fuel filter. Commonly used on Dirt bikes, Pit bikes, ATV and Scooters. [More Info]
20A4720
$44.99
Gas Tank. Most commonly (though not exclusively) used with the popularly named 'long tail' profile dirt bike / pit bike plastic sets (70D7110) and seat 70D7113. [More Info]
30A4505
$45.99
This pump is most commonly used for (and not limited to) 110cc, 125cc, 150cc, 200cc and 250cc electric start engines. [More Info]
This dip stick (dipstick / aka oil stick) applies to (and is not limited to) 50cc to 250cc engines. Approximately dimensions are:
[More Info]
20A5622
$14.99
This dip stick (dipstick / aka oil stick) commonly (though not exclusively) applies to 50cc, 70cc, 90cc, 110cc and 125cc engines, including vertical, horizontal, air and liquid cooled variations. [More Info]
30A4882
$349.99
Fuel pump / fuel position sensor. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A5244
$29.99
20A4100
$9.99
This is a black plastic gas tank cap. Most commonly (though not exclusively) used for 37cc, 39cc, 47cc and 49cc air cooled 2-stroke pocket bikes, mini bikes and other smaller scale 4-stroke motorized products. [More Info]
20A5700
$19.99
Dip stick / oil stick. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
30A4980
$29.99
Fuel pump connection wire assembly. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A4120BK
$10.99
This is a black plastic gas tank cap. Standard size fits many ATVs, Dirt Bikes, Scooters, and more. Maximum outer diameter is 89mm and approximate thread diameter is 52mm. [More Info]
80A6300
$69.99
Carburetor 30mm cable choke, includes primer to help with cold starts and starting under high moisture conditions. This carb has a 42mm breather opening and the mounting holes are 48mm apart center to center. [More Info]
20A5240BU
$12.99
High quality VISUAL FILTER HIGH FLOW/HIGH CAPACITY fuel filter. Commonly used on Dirt bikes, Pit bikes, ATV and Scooters. [More Info]
20A4725
$43.99
Gas Tank.
Associated Part: Fuel tank cap 20A4115. [More Info]
30A4520
$45.99
This pump is most commonly used for (and not limited to) 125cc to 150cc electric start engines. [More Info]
80P4170
$54.99
20mm, 49cc to 125cc carburetors most commonly used for (and not limited to) small 4-stroke dirt bikes and quads (ATVs). Also used for various 49cc 2-stroke as well as other 50cc to 125cc 4 stroke machines. [More Info]
40A4051
$20.99
Petcock - Fuel Valve, Gas Valve, Long Stem. This is commonly (but not exclusively) used for 50cc, 70cc, 90cc, 110cc, 125cc, 150cc, 200cc and 250cc ATVs, buggies, go-karts and other powersports or motorized products. [More Info]
30A4524
$45.99
This complete oil pump assembly is typically found in the Oil Pump, Clutch Assy / Oil Pump Comp / Oil Pump Assy / Oil Pipe Assy section of several part manuals. [More Info]
30A4850
$299.99
20A4110
$9.99
This is a black plastic gas tank cap. Most commonly (though not exclusively) used for 37cc, 39cc, 47cc and 49cc air cooled 2-stroke pocket bikes, mini bikes and other smaller scale 4-stroke motorized products. [More Info]
20A5740
$19.99
20A4950
$349.99
Gas Tank / Fuel Tank. Includes fuel valve / fuel shutoff (petcock). Most commonly used for (but not limited to) 250cc ATVs such as the Jianshe JS250 Mountain Lion and Baja Wilderness Trail 250 (WD250-U) ATV as well as many other clones, rebrands [More Info]
20A4121RD
$24.99
This is a red aluminum gas tank cap. Standard size fits many ATVs, Dirt Bikes, Scooters, and more. Approximate distance from inside thread to thread is 49mm. [More Info]
80A3300
$79.99
Carburetor 30mm manual choke, includes primer to help with cold starts and starting under high moisture conditions. This carb has a 42mm breather opening and the mounting holes are 48mm apart center to center. [More Info]
20A5230BK
$12.49
This is a black CNC machined anodized aluminum fuel filter (oil filter) that contains a replaceable three phase fabric filter. Ensures steady fuel flow and ultra-high grade filtration. [More Info]
20A4730
$39.99
Gas tank. Most commonly (though not exclusively) used for 50cc, 70cc, 90cc, 110cc, 125cc, 140cc, 150cc, 155cc and 160cc dirt bikes / pit bikes. [More Info]
30A4525
$45.99
This pump is most commonly used for (and not limited to) 125cc to 150cc kick start engines. [More Info]
This oil rotor / oil slinger is commonly (though not exclusively) used for 250cc vertical engine types. Approximate dimensions are:
[More Info]
30A4570
$109.99
This fuel pump profile is commonly applicable for many big brand and lesser brand name machines from all over the world. Common format for ATVs, UTVs (side-by-side), carts, buggies and other machine types in the 300cc to 1000cc range. [More Info]
21A0800
$20.99
Oil filter commonly (but not exclusively) used for 800cc engines. Most popularly used for Odes 800cc UTVs, Odes 800cc ATVs, Kandi 800cc UTVs and Kandi 800cc ATVs. [More Info]
20A4781
$354.99
Gas tank / Fuel tank. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
80A9992
$4.99
Fuel line clamp, 10mm (1cm) spring clamps, 4 pieces. [More Info]
20A5750
$19.99
Spring plate. Commonly used for (but not limited to) 400cc, 500cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc and Hisun 800cc 4x4 ATVs and Hisun 400cc UTVs, as well as many other clones, rebrands and similar displacement [More Info]
20A4160
$39.99
Plastic gas cap / fuel cap. Outer diameter 83.27 mm or 3.27in. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the world. [More Info]
30A4630
$49.99
Fuel sensor / gas sensor (aka "fuel tank float"). Most commonly used for (but not limited to) 260cc and 300cc liquid cooled ATV's, UTVs, dirt bikes / pit bikes, scooters, dune buggies, go karts and other similar products. [More Info]
Fuel pump assembly. Most commonly used for (but not limited to) 260cc and 300cc liquid cooled ATV's, UTVs, dirt bikes / pit bikes, scooters, dune buggies, go karts and other similar products. [More Info]
20A5220SV
$12.49
This is a silver colour CNC machined anodized aluminum fuel filter (oil filter) that contains a replaceable three phase fabric filter. Ensures steady fuel flow and ultra-high grade filtration. [More Info]
Tubing for carburetors and fuel lines, black. Most commonly used for larger ATV's and dirt bikes such as 250cc, 300cc, 400cc, 500cc etc. This is high quality tubing with heavy resistance to drying, cracking and thinning. [More Info]
This oil rotor / oil slinger is commonly (though not exclusively) used for 250cc vertical engine types. Approximate dimensions are:
[More Info]
Fuel filter, for (but not limited to) 150cc to 400cc ATV's, dirt bikes / pit bikes and scooters. Manufacturer part number 2.9.01.0140. Applies primarily to (but not limited to) Buyang 300cc 4x4 ATV, Gio Bear 300cc, Daymak Grunt 300cc, Midwest [More Info]
21A0200
$22.99
Oil filter commonly (but not exclusively) used for 200cc, 225cc and 250cc range engines. Most popularly used for Yamaha TW200, TW225, TTR250 and Yamaha XT Deer Gazelle 225. [More Info]
30A4551
$69.99
Oil pump. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A7950
$19.99
20A5760
$19.99
Spring plate. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A4116
$14.99
This plastic gas cap / fuel cap is commonly used for a wide range of powersports products, primarily dirt bikes, pit bikes, cross bikes and scooters though could also be found on ATVs, dune buggies etc. [More Info]
30A4810
$159.99
Fuel pump for UTV 1-3 pin connector(white) [More Info]
30A4500
$49.99
This pump is most commonly used for (and not limited to) 125cc electric start engines. [More Info]
80P1550
$44.99
This 15mm Carburetor with Manual Choke is most commonly used for (and not limited to) 2-stroke pocket bikes, mini dirt bikes and mini quads (ATVs). [More Info]
20A5220BU
$12.99
This is a blue colour CNC machined anodized aluminum fuel filter (oil filter) that contains a replaceable three phase fabric filter. Ensures steady fuel flow and ultra-high grade filtration. [More Info]
20A4810
$34.99
Gas Tank [More Info]
20A5240RD
$12.99
High quality VISUAL FILTER HIGH FLOW/HIGH CAPACITY fuel filter. Commonly used on Dirt bikes, Pit bikes, ATV and Scooters. [More Info]
30A4805
$399.99
This fuel pump profile is commonly applicable for many big brand and lesser brand name machines from all over the world. Common format for UTVs in the 300cc to 1000cc range. [More Info]
Gas cap, for (but not limited to) 150cc to 400cc ATV's, dirt bikes / pit bikes and scooters. Manufacturer part number 2.9.01.0010. Applies primarily to (but not limited to) Buyang 300cc FA-H300, Gio Bear 300cc, Daymak Grunt 300cc, Midwest 300cc, [More Info]
21A0006
$22.99
Oil filter commonly (but not exclusively) used for 200cc, 250cc, 400cc, 600cc, 800cc, 900cc, 1000cc and 1100cc engines. Most popularly used for Honda CBR400, CB400, VFR400, VTEC CB-1, CBR954, CBR929, CB1100, Kawasaki ZXR250/400, ZZR400, ZRX400 [More Info]
21A0400
$22.99
Oil filter. Commonly used for (but not limited to) 400cc, 500cc and 700cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc 4x4 ATVs and Hisun 400cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A4735BU
$36.99
20A5762
$19.99
O-ring. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A4105
$19.99
This plastic gas cap / fuel cap is used for a wide range of powersports products, most commonly ATVs and UTVs, though can also be found on dirt bikes/pit bikes, buggies, scooters etc. [More Info]
80A5190
$54.99
This 19mm / 32mm carburetor with remote choke attachment is most commonly used for (but not limited to) 50cc 70cc 90cc 110cc 125cc and 140cc ATVs and dirt bikes. [More Info]
20A4121BU
$24.99
This is a blue aluminum gas tank cap. Standard size fits many ATVs, Dirt Bikes, Scooters, and more. Approximate distance from inside thread to thread is 49mm. [More Info]
20A5630WT
$14.99
This dip stick (dipstick / aka oil stick) applies to (and is not limited to) 50cc to 150cc engines. Including GY6 125cc to 150cc engines. Most commonly used for GY6 kick start dirt bikes. [More Info]
20A5230BU
$12.49
This is a blue CNC machined anodized aluminum fuel filter (oil filter) that contains a replaceable three phase fabric filter. Ensures steady fuel flow and ultra-high grade filtration. [More Info]
20A4750
$84.99
This gas tank is most commonly (but not exclusively) used for 50cc to 150cc ATVs. This robust metal fuel tank includes fuel cap and an equally robust petcock/fuel shut-off valve that threads on to the bottom of the tank. [More Info]
20A5203
$4.99
Fuel Filter - Plastic, 49cc to 250cc Maximum outer diameter of the connections is in approximately 7.5mm [More Info]
Fuel Filter - Metal. Maximum outer diameter of the connections is in approximately 8mm. This fuel filter is most commonly used for (but not limited to) Chironex Spartan 500cc, 600cc and 1100cc EFI UTVs as well as Xinyang XY 500cc, 600cc and [More Info]
20A4782
$299.99
Gas tank / Fuel tank. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV as well as many other clones, rebrands and similar [More Info]
21A0706
$22.99
Oil filter commonly (but not exclusively) used for 400cc, 600cc, 1000cc and 1200cc engines. Most popularly used for Suzuki SV400, Suzuki SV1000, Suzuki GSX600 and Suzuki GSF1200. [More Info]
20A4740
$159.99
Gas tank. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A4735RD
$36.99
20A5612
$19.99
Engine Oil Filter Net (Strainer). Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A4115
$14.99
This plastic gas cap / fuel cap is used for a wide range of powersports products, most commonly ATVs, though can also be found on small UTVs, dirt bikes/pit bikes, buggies, scooters etc. [More Info]
This 24mm/38mm electric choke carburetor (2 pin plug) is typically found in the Carburetor Assy / Carburetor section of many different part manuals. [More Info]
80A2270
$63.99
This 26.4mm carburetor is often referred to as 26mm but sometimes also as 27mm. Manual choke profile is most commonly used for (but not limited to) 125cc, 150cc, 200cc and 250cc ATVs and dirt bikes. [More Info]
20A5940
$39.99
Oil filter screen. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A5230GD
$12.49
This is a gold CNC machined anodized aluminum fuel filter (oil filter) that contains a replaceable three phase fabric filter. Ensures steady fuel flow and ultra-high grade filtration. [More Info]
20A4755
$64.99
This gas tank most commonly (but not exclusively) applies to 50cc, 70cc, 90cc, 110cc, 125cc and 150cc ATVs. Includes metal gas cap. [More Info]
20A5204
$3.99
Fuel Filter - Plastic, 49cc - 250cc Maximum outer diameter of the connections is in approximately 6.8mm [More Info]
20A4780
$354.99
Gas Tank - XY profile. This gas tank is made from hardened, corrosion resistant steel. Most commonly used for (but not limited to) Chironex Spartan 500cc and 600cc UTVs (4x4/2x4 and similar variations), Xinyang 500cc - 600cc ATVs and UTVs [More Info]
20A5905
$6.99
This conical oil screen applies to (and is not limited to) 150cc to 400cc engines. Most commonly used for 260cc and 300cc ATVs, dirt bikes, scooters, buggies and other motorized vehicles from a wide range of manufacturers. [More Info]
21A0500
$19.99
This premium oil filter is a genuine CF Moto part and is manufactured to the highest standards. The component is typically found in the Left Crankcase section of several part manuals. [More Info]
20A4741
$159.99
Gas tank. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A4735WT
$36.99
20A7850
$109.99
Fuel injector. Commonly used for (but not limited to) 500cc engines, such as the Hisun 500cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
30A4580
$49.99
This Oil pump gear box assembly is used for a wide displacement range of ATVs.
Most popularly applies to 800cc ATVs from companies like Hisun (HSUN). [More Info]
80A5270
$63.99
This 27mm carburetor with remote choke attachment is most commonly used for (but not limited to) 125cc 150cc, 200cc and 250cc ATVs and dirt bikes. [More Info]
80A8180
$69.99
Electric choke 18mm Carburetor most commonly used for (and not limited to) 50cc GY6 style engines. Also used for some 2-stroke 49cc, 4-stroke 49cc, 50cc, 70cc and 90cc scooters (direct replacement carburetor for the 49cc/50cc Benelli scooters [More Info]
This electric choke carburetor is typically found in the Carburetor / Air Cleaner section of several part manuals. Commonly used for but not limited to GY6 / 300cc, and 330 engines. [More Info]
20A5900
$4.99
Cone oil screen. Approximate dimensions are:
[More Info]
20A4760
$94.99
This gas tank also includes the metal lock housing cap as well as the corresponding ignition switch and key. The same key will open the lock to the fuel tank and start the ATV. [More Info]
20A5206
$3.99
Fuel Filter - Plastic, 49cc - 250cc Maximum outer diameter of the connections is in approximately 7.2mm [More Info]
30A4560
$99.99
Fuel Pump - Yamaha PW50 Fuel Pump Assembly [More Info]
20A4180BK
$39.99
This gas cap / fuel cap is commonly used for a wide range of ATVs and UTVs. Most popularly applies to the Odes and Kangdi (Kandi) 800cc UTVs. [More Info]
21A0604
$39.99
Oil filter commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, dirt bikes, street bikes, UTVs and buggies. [More Info]
20A4150BK
$23.99
Gas cap / fuel cap. Commonly used for (but not limited to) 500cc, 700cc and 800cc engines, such as the Hisun 500cc, Hisun 700cc and Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A2424
$9.99
Valve spring lock clip (valve keeper). Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A7870
$159.99
Fuel injector. Commonly used for (but not limited to) 700cc engines, such as the Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
Fuel line with length of 28cm (11 inches) with two 7mm hose spring clamps. Three total pieces. [More Info]
80A5300
$66.99
This 30mm/40mm carburetor with remote choke attachment is most commonly used for (but not limited to) 125cc 150cc, 200cc and 250cc ATVs and dirt bikes. [More Info]
80A2260
$64.99
This 26mm carburetor with manual choke lever is most commonly used for (but not limited to) 125cc to 250cc ATVs, dirt bikes, golf carts, go karts / buggies and scooters. [More Info]
20A4120CR
$11.99
This is a chrome plastic gas tank cap. Standard size fits many ATVs, Dirt Bikes, Scooters, and more. Maximum outer diameter is 89mm and approximate thread diameter is 52mm. [More Info]
20A5201
$3.99
Fuel Filter - Plastic, 49cc to 250cc
Maximum outer diameter of the connections is in approximately 7.2mm [More Info]
20A4765
$49.99
Gas Tank [More Info]
40A4008
$21.99
This is a fuel shutoff valve / petcock. It bolts to the under-body of the the gas / fuel tank and servers to manually disable the flow of fuel to the carburetor. [More Info]
40A4010
$21.99
Petcock - fuel valve, aka gas valve. Most commonly (though not exclusively) used on Yamaha PW50 dirt bike as well as similarly formatted motocross and powersports machines. [More Info]
30A4880
$399.99
This fuel pump / fuel position sensor is commonly used for a wide range of ATVs and UTVs. Most popularly applies to the Odes and Kangdi (Kandi) 800cc UTVs. [More Info]
21A0140
$19.99
Oil filter. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV as well as many other clones, rebrands and similar displacement [More Info]
30A4883
$379.99
Fuel pump / fuel position sensor. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A2423
$9.99
Valve retainer ring. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A7970
$19.99
Fuel injector mounting seat. Commonly used for (but not limited to) 400cc and 700cc engines, such as the Hisun 400cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A4117
$99.99
Fuel Tank Cap - Metal, Lockable, 2 keys included. Most commonly used for (but not limited to) 300cc and 550cc liquid cooled ATV's, UTVs, dune buggies, go karts and other similar products. [More Info]
80A2220
$59.99
This 22mm/37mm carburetor with manual choke lever is most commonly used for (but not limited to) 90cc 110cc 125cc and 140cc dirt bikes. Commonly called "PZ22". [More Info]
80A2300
$66.99
This 30mm carburetor with manual choke lever is most commonly used for (but not limited to) 125cc 150cc, 200cc and 250cc ATVs and dirt bikes. [More Info]
Tubing for carburetors and for fuel lines 20m roll Grey. This is high quality tubing with heavy resistance to drying, cracking and thinning. [More Info]
20A5202
$3.99
Fuel Filter - Plastic, 49cc to 250cc
Maximum outer diameter of the connections is in approximately 7.2mm [More Info]
20A4770
$64.99
Gas Tank - 50cc to 155cc, ATV [More Info]
20A4122BU
$5.99
Gas Cap Vent Tube - Blue [More Info]
30A4565
$99.99
This genuine oil pump is typically found in the Oil Pump section of several part manuals. Commonly used for but not limited to 4-stroked water cooled CF188 / [More Info]
20A5280
$30.99
This fuel filter / gas filter is commonly used for a wide range of ATVs and UTVs. Most popularly applies to the Odes and Kangdi (Kandi) 800cc UTVs. [More Info]
30A4530
$24.99
Oil pump for (but not limited to) 300cc to 400cc ATVs, dirt bikes, scooters, buggies and other powersports products. Manufacturer part number 2. [More Info]
30A4740
$84.99
Fuel pump. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A2422
$19.99
Spring plate. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A7860
$149.99
This Fuel Injector, ATV, Hisun, 800cc is used for a wide displacement range of ATVs.
Most popularly applies to 800cc ATVs from companies like Hisun (HSUN) and Powermax.
Common [More Info]
40A4004
$54.99
Petcock - Fuel Valve, Gas Valve, includes 2.9.01.1120 nut. Most commonly used for (but not limited to) 300cc and 550cc liquid cooled ATV's, UTVs, dune buggies, go karts and other similar products. [More Info]
20A4700
$39.99
Gas tank. Commonly (though not exclusively) used for 49cc 2-stroke air cooled mini ATVs and other small machines. [More Info]
This 19mm/32mm carburetor with manual choke lever and side facing fuel overflow (for front facing overflow refer to part number 80A2191) is most commonly used for (but not limited to) 50cc 70cc 90cc 110cc 125cc and 140cc ATVs and dirt bikes. [More Info]
80A9910
$39.99
Tubing for carburetors and for fuel lines. 10m rolls in of clear (aka translucent or transparent) fuel line.
Fuel line inner diameter is rated as 5 to 5. [More Info]
40A4007
$18.99
This is a fuel shutoff valve / petcock. It bolts to the under-body of the the gas / fuel tank and servers to manually disable the flow of fuel to the carburetor. [More Info]
20A4715
$79.99
This gas tank is most commonly (but not exclusively) used for 150cc, 20cc, 250cc and 300cc machines. It includes the corresponding metal petcock/shut off valve. [More Info]
20A4122RD
$5.99
Gas Cap Vent Tube - Red [More Info]
20A5237
$16.99
This fuel tank filter is typically found in the Fuel Tank section of several part manuals. Commonly used for but not limited to GX110, GX120, GX140, GX160, [More Info]
20A4195BK
$49.99
Fuel cap / Gas cap commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. [More Info]
30A4872
$359.99
Fuel pump. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV as well as many other clones, rebrands and similar displacement [More Info]
20A4128CR
$15.99
20A2670
$9.99
Filter spring. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
21A0900
$38.99
Oil filter. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTV, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A7900
$74.99
This injector seat is most commonly (but not exclusively) used for CFmoto ATVs and UTVs such as 191Q, 191R,CF500AU-7S, 191R-C, CF500AU-6B, 191R-U550, 191R-X550, 191R-Z550, and many other makes, models and brands. [More Info]
20A5620
$14.99
This dip stick (dipstick / aka oil stick) applies to (and is not limited to) 50cc, 70cc, 90cc, 110cc, 125cc, 140cc, 150cc and 155cc, 160cc, 200cc and 250cc engines. [More Info]
80A5260
$63.99
This 26mm carburetor with remote choke attachment is most commonly used for (but not limited to) 125cc to 250cc ATVs and dirt bikes. Also very commonly used for many models of golf carts and other models of Go karts / buggies and some scooters. [More Info]
80A9900
$34.99
Tubing for carburetors and for fuel lines. 10m rolls
Fuel line inner diameter is rated as 5 to 5.5mm. Will work with connections (carburetor, gas tank and fuel filter outlets/intakes) ranging from approximately 5. [More Info]
In-line fuel shutoff with attachment hook, used primarily for 5-7mm fuel line applications for any displacement, most commonly used (but not limited to) 50cc to 300cc ATVs, Dirt Bikes, gas powered Scooter, Go-Karts etc. [More Info]
20A4900
$9.99
Fuel Mixing Canister with maximum volume of 500ml. Molded markers indicate fill levels for 20:1, 25:1 and 40:1 gas:oil ratios. [More Info]
20A4122BK
$5.99
Gas Cap Vent Tube - Black [More Info]
20A5000
$9.99
This fuel tank joint assembly is typically found in the Fuel Tank / Engine (Fuel Tank, Recoil Starter, Muffler) section of several part manuals. [More Info]
30A4895
$399.99
Fuel Pump commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. [More Info]
20A5234
$11.99
Fuel filter. Commonly used for (but not limited to) 400cc, 500cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc and Hisun 800cc UTVs as well as many other clones, rebrands and similar displacement machines. [More Info]
21A0825
$34.99
Oil filter. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the world. [More Info]
20A4250
$19.99
Gas tank vent pipe. Commonly used for (but not limited to) 400cc, 500cc and 700cc engines, such as the Hisun 400cc, Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
30A2520
$19.99
Oil drain plug (screw). Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
40A4070
$29.99
This fuel shutoff valve / petcock is commonly (but not exclusively) used for 250cc engine models such as the Jianshe JS250ATV. It bolts to the under-body of the the gas / fuel tank and servers to manually disable the flow of fuel to the carburetor. [More Info]