BLB7615BU
$16.99
Light bulb 56V 25W. Single contact. [More Info]
CHG1220AS
$43.99
Standard Polarity 12V 2A (2000mA) Class 2 Battery Trickle Charger with alligator clips. These UL certified chargers are ideal for charging conventional powersport batteries such as the GT5L-BS, GT7L-BS, GT9L-BS, GT12L-BS, GT14L-BS, GT20L-BS [More Info]
CHG3616FS
$64.99
Charger 36V, 1.6A (1600mA) Standard Polarity. The charger plug is a three port inline female DIN connector, sometimes referred to as a GX16 plug or a GX16-3P plug. [More Info]
BLB7666
$14.99
Light bulb 56V 25W. Dual contact. High/Low beam [More Info]
CHG4825FS
$87.99
Charger - 48V, 2.5A (2500mA) Standard Polarity. The charger plug is a three port inline female DIN connector, sometimes referred to as a GX16 plug or a GX16-3P plug. [More Info]
CHG4825CL
$85.99
Charger 48V, 2.5A (2500mA), standard polarity for use with Lithium batteries (Lithium [Li], commonly referred to as Lithium-ion battery or 'LIB', normally comprised of lithium cobalt oxide [LiCoO2], lithium iron phosphate [LiFePO4] or lithium [More Info]
CHG2435CS
$84.99
Charger 24V, 3.5A (3500mA) Standard Polarity. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
BATEV12045-1
$219.99
This is a Yimatzu brand 6-DZM-45 (also referred to as 6-DCM-45, EV12450, 6-EVF-45 and 6-FM-45) Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, [More Info]
CHG2450TS
$104.99
Charger 24V, 5A (5000mA) Standard Polarity with Smart Charge for use with Lead-Acid batteries. Charger plug is a T-prong / T-connector version of a PC plug. [More Info]
Turn signal bulb, peanut style. This light bulb (12V 5W) is typically found in the Electrical System (EPA) / Electric System (EEC) / Headlights / Accessories List #1 / Frame / EPA Front Headlight / Front Components / Main Frame / Differential [More Info]
CHG4825XS
$87.99
Charger 48V, 2.5A (2500mA) Standard Polarity. Charger plug is a Male Three Pin DIN connector (also referred to as an XLR connector). Pin 1 positive, pin 2 is negative and pin 3 is ground. [More Info]
CHG4825CL
$85.99
Charger 48V, 2.5A (2500mA), standard polarity for use with Lithium batteries (Lithium [Li], commonly referred to as Lithium-ion battery or 'LIB', normally comprised of lithium cobalt oxide [LiCoO2], lithium iron phosphate [LiFePO4] or lithium [More Info]
CHG2435CS
$84.99
Charger 24V, 3.5A (3500mA) Standard Polarity. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
BATEV12032A
$159.99
This is a Yimatzu brand 6-DZM-32 (also referred to as 6-DCM-32A, EV12320, 6-EVF-32, 6-EVF-32A, 6-FM-32 and 6-FM-32A) Sealed Lead Acid (SLA), Maintenance Free (MF), [More Info]
CHG4820TR
$82.99
Charger 48V, 2A (2000mA) Reverse Polarity with Smart Charge for use with Lead-Acid batteries. Charger plug is a T-prong / T-connector version of a PC plug. [More Info]
CHG4820TG
$58.99
Charger 48V applications (54.6V output), 2A (2000mA) for Lithium Ion batteries. UL/CUL approved. This UL/CUL is very important and required legal certification in USA and Canada, caution if price-shopping chargers online. [More Info]
BLB7015OG
$15.99
Light Bulb 12V 21W. Single contact, amber. [More Info]
Light bulb 12V 5W, turn signal bulb. Peanut style, large. [More Info]
BATEV12014
$66.99
This is a Yimatzu brand 6-DZM-14 (also referred to as 6-DCM-14, EV12140, 6-EVF-14 and 6-FM-14) Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, [More Info]
BLB5455
$14.99
Light Bulb - 55V - 56V 25/25W, Dual Contact. Commonly used as head light bulbs for a very wide variety of ATVs, UTV, scooters, dune buggies, go karts as well as other 'lawn & garden', powersports and mobility products. [More Info]
CHG4820DF
$69.99
Charger 48V applications (54.6V output), 2A (2000mA), DC 2.1 plug/port, for Lithium Ion batteries. UL/ULC approved. This UL/ULC is very important and required legal certification in USA and Canada, caution if price-shopping chargers online. [More Info]
CHG4835XS
$104.99
Charger 48V, 3.5A (3500mA) Standard Polarity. Charger plug is a Male Three Pin DIN connector (also referred to as an XLR connector). Pin 1 positive, pin 2 is negative and pin 3 is ground. [More Info]
CHG2425FS
$68.99
Charger 24V, 2.5A (2500mA) Standard Polarity. The charger plug is a three port inline female DIN connector, sometimes referred to as a GX16 plug or a GX16-3P plug. [More Info]
Charger 48V, 2.5A (2500mA) Reverse Polarity with Smart Charge for use with Lead-Acid batteries. Charger plug is a T-prong / T-connector version of a PC plug. [More Info]
CHG3615DC5521L
$39.99
Charger 36V (Output 42.0V), 1.5A (1500mA), max amperage 2.0A at 50/60Hz, DC2.1, Standard Polarity with Smart Charge for use with Lithium batteries. [More Info]
BLB7010
$9.99
This light bulb (12V 10W) for headlights / tail lights / front & rear turn signal lights is typically found in the Electrical System / Headlights / Tail Lights [More Info]
BLB7050
$14.99
Light Bulb 24V 21W. Single Contact. [More Info]
Light bulb 12V 21W, turn signal bulb. Peanut style, large. [More Info]
BATMF1209A
$59.99
This is a Yimatzu brand GTX9A-BS Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, 12V battery. This is the highest grade of SLA battery produced by Yimatzu and continues to rank as a top performing MF battery in the [More Info]
BLB6115
$16.99
LED light bulb 48V 1W. Dual contact. Most commonly used as a tail light bulb. [More Info]
CHG4835FS
$104.99
Charger - 48V, 3.5A (3500mA) Standard Polarity. The charger plug is a three port inline female DIN connector, sometimes referred to as a GX16 plug or a GX16-3P plug. [More Info]
CHG2425FS
$68.99
Charger 24V, 2.5A (2500mA) Standard Polarity. The charger plug is a three port inline female DIN connector, sometimes referred to as a GX16 plug or a GX16-3P plug. [More Info]
CHG4830TR
$94.99
Charger 48V, 3A (3000mA) Reverse Polarity with Smart Charge for use with Lead-Acid batteries. Charger plug is a T-prong / T-connector version of a PC plug. [More Info]
CHG3620DC5521L
$49.99
Charger 36V (Output 42.0V), 2A (2000mA), max amperage 3.0A at 50/60Hz, DC2.1, Standard Polarity with Smart Charge for use with Lithium batteries. [More Info]
CHG4820DN
$74.99
Charger 48V applications (54.6V output), 2A (2000mA), DC 2.1 plug/port, for Lithium Ion batteries. UL/ULC approved. This UL/ULC is very important and required legal certification in USA and Canada, caution if price-shopping chargers online. [More Info]
CHG5220DC
$58.99
Charger 52V, 2A (2000mA), DC2.1, standard polarity for use with Lithium batteries (Lithium [Li], commonly referred to as Lithium-ion battery or 'LIB', normally comprised of lithium cobalt oxide [LiCoO2], lithium iron phosphate [LiFePO4] or lithium [More Info]
BLB7000
$14.99
Light Bulb 6V 25W [More Info]
BLB7005
$9.99
Light Bulb 12V 3W. Single Contact [More Info]
BLB5450
$16.99
Light Bulb, 12V 35W. Dual contact. Bulb ID: P15d/25-1. Most commonly used as head light bulb for a wide variety of applications.
[More Info]
BATMF1214AHBS
$79.99
This is a Yimatzu brand GTX14AH-BS Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, 12V battery. This is the highest grade of SLA battery produced by Yimatzu and continues to rank as a top performing MF battery in [More Info]
MP3000
$199.99
MP3 Player - power toggle, volume, track selection and associated speaker. Associated parts are MP3 switch (10A8250) and speaker (60A3100).
This mp3 player and speaker combo profile is commonly applicable for many big brand and lesser brand [More Info]
CHG2430FS
$74.99
Charger 24V, 3A (3000mA) Standard Polarity. The charger plug is a three port inline female DIN connector, sometimes referred to as a GX16 plug or a GX16-3P plug. [More Info]
CHG6020TS
$90.99
Charger 60V, 2A (2000mA) Standard Polarity with Smart Charge for use with Lead-Acid batteries. Charger plug is a T-prong / T-connector version of a PC plug. [More Info]
CHG2410TP
$19.99
Charger 24V, 1A (1000mA) for Lithium Ion batteries. Direct replacement for SHOK Scooters Electron kick scooter as well as many other brands and models. [More Info]
CHG3620DC8016L
$49.99
Charger 36V (Output 42.0V), 2A (2000mA), max amperage 3.0A at 50/60Hz, Standard Polarity with Smart Charge for use with Lithium batteries. Charger connector is a DC8016 male with standard wall plug for power input. [More Info]
CHG4820DN
$74.99
Charger 48V applications (54.6V output), 2A (2000mA), DC 2.1 plug/port, for Lithium Ion batteries. UL/ULC approved. This UL/ULC is very important and required legal certification in USA and Canada, caution if price-shopping chargers online. [More Info]
CHG5230DC
$89.99
Charger 52V, 3A (3000mA), DC2.1, standard polarity for use with Lithium batteries (Lithium [Li], commonly referred to as Lithium-ion battery or 'LIB', normally comprised of lithium cobalt oxide [LiCoO2], lithium iron phosphate [LiFePO4] or lithium [More Info]
BLB7006
$9.99
Light Bulb - 12V 4W, Single Contact [More Info]
Light bulb 6V 35W. High Intensity Xenon Bulb, Dual Contact. [More Info]
BATMF12065L
$54.99
This is a Yimatzu brand GTX6.5L-BS Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, 12V battery. This is the highest grade of SLA battery produced by Yimatzu and continues to rank as a top performing MF battery in [More Info]
CHG8025CS
$107.99
Charger 80V, 2.5A (2500mA) Standard Polarity. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
CHG2430FS
$74.99
Charger 24V, 3A (3000mA) Standard Polarity. The charger plug is a three port inline female DIN connector, sometimes referred to as a GX16 plug or a GX16-3P plug. [More Info]
BATMF1224HLBS
$127.99
This is a Yimatzu brand GTX24L-BS Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, 12V battery. This is the highest grade of SLA battery produced by Yimatzu and continues to rank as a top performing MF battery in the [More Info]
CHG6025TL
$99.99
Charger 60V, 2.5A (2500mA), Standard Polarity for use with Lithium batteries (Lithium [Li], commonly referred to as Lithium-ion battery or 'LIB', normally comprised of lithium cobalt oxide [LiCoO2], lithium iron phosphate [LiFePO4] or lithium [More Info]
Charger 36V, 1.5A (1500mA) for Lithium Ion batteries. Direct replacement for SHOK Scooters Neutron kick scooters as well as many other brands and models. [More Info]
CHG4820DC5521L
$78.99
Charger 48V, 2A (2000mA), DC2.1, Standard Polarity with Smart Charge for use with Lithium batteries. Charger connector is an insulated DC 5.5*2. [More Info]
CHG6020DC
$79.99
Charger 60V, 2A (2000mA), DC2.1, standard polarity for use with Lithium batteries (Lithium [Li], commonly referred to as Lithium-ion battery or 'LIB', normally comprised of lithium cobalt oxide [LiCoO2], lithium iron phosphate [LiFePO4] or lithium [More Info]
BLB5200
$15.99
Light Bulb, 12V 18W. Dual contact. Bulb ID: Ba20d S1 12V 18/18. Most commonly used as head light bulb for a wide variety of applications. [More Info]
BLB7550BU
$17.99
Light bulb 6V 35W. High Intensity Xenon Bulb, Dual Contact, Blue. [More Info]
CHG3630CS
$84.99
Charger 36V, 3.0A (3000mA) Standard Polarity. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
CHG2420FS
$64.99
Charger 24V, 2A (2000mA) Standard Polarity. The charger plug is a three port inline female DIN connector, sometimes referred to as a GX16 plug or a GX16-3P plug. [More Info]
CHG4820CS
$73.99
Charger 48V 2.0A (2000mA) Standard Polarity with Smart Charge for use with Lead-Acid batteries. Charger plug is a Three Pin BS EN 60320 C13 connector. [More Info]
KIT5227
$20.99
BATMF1216
$82.99
This is a Yimatzu brand GTX16L-BS Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, 12V battery. This is the highest grade of SLA battery produced by Yimatzu and continues to rank as a top performing MF battery in the [More Info]
CHG8425TS
$114.99
Charger 84V, 2.5A (2500mA) Standard Polarity with Smart Charge for use with Lead-Acid batteries. Charger plug is a three pin BS EN 60320 C13 connector, including T-prong / T-connector universal adaptation of a PC plug. [More Info]
CHG7220TL
$99.99
Charger 72V, 2A (2000mA), Standard Polarity for use with Lithium batteries (Lithium [Li], commonly referred to as Lithium-ion battery or 'LIB', normally comprised of lithium cobalt oxide [LiCoO2], lithium iron phosphate [LiFePO4] or lithium [More Info]
CHG3620TP
$39.99
Charger 36V, 2A (2000mA) for Lithium Ion batteries. UL/CUL approved. This UL/CUL is very important and required legal certification in USA and Canada, caution if price-shopping chargers online. [More Info]
CHG3625SB
$59.99
Charger 36V applications, 1.5A (1500mA), Split 2 port plug, for Lithium Ion batteries. UL/ULC approved. This UL/ULC is very important and required legal certification in USA and Canada, caution if price-shopping chargers online. [More Info]
CHG4830DC
$79.99
Charger 48V, 3A (3000mA), DC2.1, standard polarity for use with Lithium batteries (Lithium [Li], commonly referred to as Lithium-ion battery or 'LIB', normally comprised of lithium cobalt oxide [LiCoO2], lithium iron phosphate [LiFePO4] or lithium [More Info]
BLB5220
$14.99
This headlight bulb (12V 35W), dual contact is typically found in the Electrical System (EPA) / Headlights section of several part manuals. [More Info]
BATEV12012
$59.99
This is a Yimatzu brand 6-DZM-12 (also referred to as 6-DCM-12, EV12120, 6-EVF-12 and 6-FM-12) Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, [More Info]
CHG4818CS
$72.99
Charger 48V, 1.8A (1800mA) Standard Polarity. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
BLB5210
$15.99
Light Bulb 12V 25W. Dual contact. Bulb ID: Ba20d S1 12V 25/25. Most commonly used as head light bulb for a wide variety of applications.
[More Info]
BATMF1220LFA
$96.99
This is a Yimatzu brand GTX20L-FA Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, 12V battery. This is the highest grade of SLA battery produced by Yimatzu and continues to rank as a top performing MF battery in the [More Info]
CHG2412FS
$59.99
Charger 24V, 1.2A (1200mA) Standard Polarity. The charger plug is a three port inline female DIN connector, sometimes referred to as a GX16 plug or a GX16-3P plug. [More Info]
CHG4835CS
$104.99
Charger 48V, 3.5A (3500mA) Standard Polarity. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
CHG2420FS
$64.99
Charger 24V, 2A (2000mA) Standard Polarity. The charger plug is a three port inline female DIN connector, sometimes referred to as a GX16 plug or a GX16-3P plug. [More Info]
CHG3640CS
$124.99
Charger 36V, 4.0A (4000mA) Standard Polarity. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
KIT5229
$20.99
BATMF1230LBS
$169.99
This is a Yimatzu brand GTX30L-BS (aka GIX30L-BS) Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, 12V battery. This is the highest grade of SLA battery produced by Yimatzu and continues to rank as a top performing [More Info]
CHG7220TS
$89.99
Charger 72V, 2A (2000mA) Standard Polarity with Smart Charge for use with Lead-Acid batteries. Charger plug is a T-prong / T-connector version of a PC plug. [More Info]
CHG-USB
$44.99
USB direct to battery hard wire charging cable. Commonly used for motorcycles, scooters, ATVs and buggies as well as other powersports and mobility products. [More Info]
CHG3625SB
$59.99
Charger 36V applications, 1.5A (1500mA), Split 2 port plug, for Lithium Ion batteries. UL/ULC approved. This UL/ULC is very important and required legal certification in USA and Canada, caution if price-shopping chargers online. [More Info]
CHG6030DC
$119.99
Charger 60V, 3A (3000mA), DC2.1, standard polarity for use with Lithium batteries (Lithium [Li], commonly referred to as Lithium-ion battery or 'LIB', normally comprised of lithium cobalt oxide [LiCoO2], lithium iron phosphate [LiFePO4] or lithium [More Info]
BLB5225
$9.99
This light bulb (12V 5W), dual contact is typically found in the Electrical System section of several part manuals. Commonly used for but not limited to 300cc, 325cc, 330cc, 500cc, and 550cc engines. [More Info]
BATEV12020
$99.99
This is a Yimatzu brand 6-DCM-20 (also referred to as 6-DZM-20, EV12200, 6-EVF-20 and 6-FM-20) Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, specialized [More Info]
BLB5300
$15.99
High quality light bulb 12V 35/35W, 3 Prong. Stainless steel lamp holder with transparent quartz glass. Bulb IDs: H4 12V 35/35W P43T. HS1 12V35/35 P43T. [More Info]
BATMF1212L
$73.99
This is a Yimatzu brand GTX12L-BS Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, 12V battery. This is the highest grade of SLA battery produced by Yimatzu and continues to rank as a top performing MF battery in the [More Info]
CHG2416FS
$59.99
Charger 24V, 1.6A (1600mA) Standard Polarity. The charger plug is a three port inline female DIN connector, sometimes referred to as a GX16 plug or a GX16-3P plug. [More Info]
LVR3500CR
$39.99
Scooter Lever Set - Electric Scooter, 500W [More Info]
BLB7610BU
$16.99
Light Bulb - 56V 25W, Dual Contact, Blue. Diameter 15mm (0.6in), height 45.2mm (1.78in). [More Info]
CHG4830XS
$94.99
Charger 48V, 3.0A (3000mA) Standard Polarity. Charger plug is a Male Three Pin DIN connector (also referred to as an XLR connector). Pin 1 positive, pin 2 is negative and pin 3 is ground. [More Info]
CHG3614CS
$64.99
Charger 36V, 1.4A (1400mA) Standard Polarity. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
KIT3089
$25.99
BATMF1209BS
$59.99
This is a Yimatzu brand GTX9-BS Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, 12V battery. This is the highest grade of SLA battery produced by Yimatzu and continues to rank as a top performing MF battery in the [More Info]
CHG8025TS
$109.99
Charger 80V, 2.5A (2500mA) Standard Polarity with Smart Charge for use with Lead-Acid batteries. Charger plug is a T-prong / T-connector version of a PC plug. [More Info]
CHG2430TS
$69.99
Charger 24V, 3A (3000mA) Standard Polarity with Smart Charge for use with Lead-Acid batteries. Charger plug is a T-prong / T-connector version of a PC plug. [More Info]
CHG7230DC
$119.99
Charger 72V, 3A (3000mA), DC2.1, standard polarity for use with Lithium batteries (Lithium [Li], commonly referred to as Lithium-ion battery or 'LIB', normally comprised of lithium cobalt oxide [LiCoO2], lithium iron phosphate [LiFePO4] or lithium [More Info]
BLB6101
$14.99
This light bulb (12V 21-3W), dual contact is typically found in the Electrical System section of several part manuals. Commonly used for but not limited to 300cc, [More Info]
WCH2000-CBL
$139.99
Performance Specifications WCH2000-CBL, 2000lb Winch Kit
[More Info]
[More Info]
BLB5300BU
$16.99
High quality light bulb 12V 35/35W, 3 Prong. Stainless steel lamp holder with blue quartz glass. Bulb IDs: H4 12V 35/35W P43T. HS1 12V35/35 P43T. [More Info]
BATMF1214L
$70.99
This is a Yimatzu brand GTX14L-BS Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, 12V battery. This is the highest grade of SLA battery produced by Yimatzu and continues to rank as a top performing MF battery in the [More Info]
CHG2440FS
$87.99
Charger 24V, 4.0A (4000mA) Standard Polarity. The charger plug is a three port inline female DIN connector, sometimes referred to as a GX16 plug or a GX16-3P plug. [More Info]
BLB7650BU
$16.99
Light bulb 12V 25W. Dual Contact, blue. [More Info]
CHG4830FS
$99.99
Charger - 48V, 3.0A (3000mA) Standard Polarity. The charger plug is a three port inline female DIN connector, sometimes referred to as a GX16 plug or a GX16-3P plug. [More Info]
KIT3090
$23.99
BATMF1230U1
$95.99
This is a Yimatzu brand U1 SP-30 Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, 12V battery.
This is the highest grade of SLA battery produced by Yimatzu and continues to rank as a top performing MF battery in the [More Info]
CHG6030TS
$102.99
Charger 60V, 3.0A (3000mA) Standard Polarity for use with Lead-Acid batteries. Charger plug is a T-prong / T-connector version of a PC plug. The T-shaped center port of this plug is able to accommodate any style of PC plug. [More Info]
CHG3616TS
$58.99
Charger 36V, 1.6A (1600mA) Standard Polarity with Smart Charge for use with Lead-Acid batteries. Charger plug is a T-prong / T-connector version of a PC plug. [More Info]
CHG7230TL
$189.99
Charger 72V, 6A (6000mA), standard polarity for use with Lithium batteries (Lithium [Li], commonly referred to as Lithium-ion battery or 'LIB', normally comprised of lithium cobalt oxide [LiCoO2], lithium iron phosphate [LiFePO4] or lithium [More Info]
BLB6110
$14.99
This light bulb (12V 21/5W), dual contact is typically found in the Electrical System / Tail Light / Rear Light / EPA Rear Tail Light / Bumper section of several [More Info]
WCH3000-CBL
$159.99
Performance Specifications WCH3000-CBL, 3000lb Winch Kit
[More Info]
[More Info]
BLB5310
$16.99
High quality halogen light bulb 12V 60/55W, 3 Prong. Stainless steel lamp holder with transparent quartz glass. H4 12V 60/55W P43T. Most commonly used as head light bulb for a wide variety of applications. [More Info]
BATMF1220LBS
$96.99
This is a Yimatzu brand GTX20L-BS Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, 12V battery. This is the highest grade of SLA battery produced by Yimatzu and continues to rank as a top performing MF battery in the [More Info]
CHG2440XS
$87.99
Charger 24V, 4.0A (4000mA) Standard Polarity. Charger plug is a Male Three Pin DIN connector (also referred to as an XLR connector). Pin 1 positive, pin 2 is negative and pin 3 is ground. [More Info]
BLB7662
$9.99
Light bulb 56V 5W. Dual contact. 56V/10/5W [More Info]
CHG3620CS
$68.99
Charger 36V, 2.0A (2000mA) Standard Polarity. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
CHG4820TS
$78.99
Charger 48V, 2.0A (2000mA) Standard Polarity with Smart Charge for use with Lead-Acid batteries. Charger plug is a T-prong / T-connector version of a PC plug. [More Info]
CHG4825TL
$89.99
Charger 48V, 2.5A (2500mA), standard polarity for use with Lithium batteries (Lithium [Li], commonly referred to as Lithium-ion battery or 'LIB', normally comprised of lithium cobalt oxide [LiCoO2], lithium iron phosphate [LiFePO4] or lithium [More Info]
CHG6030TL
$104.99
Charger 60V, 3.0A (3000mA), standard polarity for use with Lithium batteries (Lithium [Li], commonly referred to as Lithium-ion battery or 'LIB', normally comprised of lithium cobalt oxide [LiCoO2], lithium iron phosphate [LiFePO4] or lithium [More Info]
CHGDC3P
$14.99
DC charger adapter. Converting DC2.1 into 3-P connector profile. [More Info]
BATMF1204
$39.99
This is a Yimatzu brand GTX4L-BS Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, 12V battery. This is the highest grade of SLA battery produced by Yimatzu and continues to rank as a top performing MF battery in the [More Info]
BLB5315
$16.99
High quality light bulb 12V 100/90W, 3 Prong. Stainless steel lamp holder with transparent quartz glass. H4 12V 100/90W P43T. Most commonly used as head light bulb for a wide variety of applications. [More Info]
CHG2440CS
$87.99
Charger 24V, 4.0A (4000mA) Standard Polarity. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
CHG1215AS
$42.99
Charger 12V, 1.5A (1500mA) Standard Polarity with alligator clips.
Be sure to use this charger only in the designated applications with corresponding power ratings and polarities. [More Info]
BLB5120RD
$9.99
Light Bulb - LED, 12V, 3W, 8.5mm base. [More Info]
CHG6030CS
$94.99
Charger 60V, 3.0A (3000mA) Standard Polarity for use with Lead-Acid batteries. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
CHG4825TS
$87.99
Charger 48V, 2.5A (2500mA) Standard Polarity with Smart Charge for use with Lead-Acid batteries. Charger plug is a T-prong / T-connector version of a PC plug. [More Info]
CHG4830TL
$96.99
Charger 48V, 3.0A (3000mA), standard polarity for use with Lithium batteries (Lithium [Li], commonly referred to as Lithium-ion battery or 'LIB', normally comprised of lithium cobalt oxide [LiCoO2], lithium iron phosphate [LiFePO4] or lithium [More Info]
CHGDCXLR
$14.99
DC charger adapter. Converting DC2.1 into 3P-XLR connector profile. [More Info]
BATMF1205
$49.99
This is a Yimatzu brand GTX5L-BS Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, 12V battery. This is the highest grade of SLA battery produced by Yimatzu and continues to rank as a top performing MF battery in the [More Info]
BLB5350
$16.99
High quality light bulb 24V 75/70W, 3 Prong. Stainless steel lamp holder with transparent quartz glass. H4 24V 75/70W P43T. Most commonly used as head light bulb for a wide variety of applications. [More Info]
CHG2450FS
$104.99
Charger 24V, 5.0A (5000mA) Standard Polarity. The charger plug is a three port inline female DIN connector, sometimes referred to as a GX16 plug or a GX16-3P plug. [More Info]
CHG1205AS
$37.99
Standard Polarity 12V 0.5A (500mA) Class 2 Battery Trickle Charger with alligator clips. These UL certified chargers are ideal for charging conventional powersport batteries such as the GT5L-BS, GT7L-BS, GT9L-BS, GT12L-BS, GT14L-BS, GT20L-BS [More Info]
CHG1415AS
$42.99
Trickle Charger 14.7V, 1.5A (1500mA) Standard Polarity with alligator clips. Be sure to use this charger only in the designated applications with corresponding power ratings and polarities. [More Info]
CHG3625CS
$79.99
Charger 36V, 2.5A (2500mA) Standard Polarity. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
CHG2415CS
$59.99
Charger 24V, 1.5A (1500mA) Standard Polarity. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
CHG2410CS
$54.99
Charger 24V, 1A (1000mA) Standard Polarity. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
CHG4830TS
$94.99
Charger 48V, 3.0A (3000mA) Standard Polarity with Smart Charge for use with Lead-Acid batteries. Charger plug is a T-prong / T-connector version of a PC plug. [More Info]
CHG7225TL
$104.99
Charger 72V, 2.5A (2500mA), Standard Polarity for use with Lithium batteries (Lithium [Li], commonly referred to as Lithium-ion battery or 'LIB', normally comprised of lithium cobalt oxide [LiCoO2], lithium iron phosphate [LiFePO4] or lithium [More Info]
CHG2410TS
$64.99
Charger 24V, 1A (1000mA) Standard Polarity with Smart Charge for use with Lead-Acid batteries. Charger plug is a T-prong / T-connector version of a PC plug. [More Info]
CHG4820MT
$74.99
Charger 48V applications (54.6V output), 2A (2000mA), MIC plug/port, for Lithium Ion batteries. UL/ULC approved. This UL/ULC is very important and required legal certification in USA and Canada, caution if price-shopping chargers online. [More Info]
CHGDCRCA
$14.99
DC charger adapter. Converting DC2.1 into RCA connector profile. [More Info]
BATMF1207L
$54.99
This is a Yimatzu brand GTX7L-BS Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, 12V battery. This is the highest grade of SLA battery produced by Yimatzu and continues to rank as a top performing MF battery in the [More Info]
BLB5355
$16.99
High quality light bulb 24V 100/90W, 3 Prong. Stainless steel lamp holder with transparent quartz glass. H4 24V 100/90W P43T. Most commonly used as head light bulb for a wide variety of applications. [More Info]
CHG2450XS
$104.99
Charger 24V, 5.0A (5000mA) Standard Polarity. Charger plug is a Male Three Pin DIN connector (also referred to as an XLR connector). Pin 1 positive, pin 2 is negative and pin 3 is ground. [More Info]
CHG1208AS
$39.99
Standard Polarity 12V 0.8A (800mA) Class 2 Battery Trickle Charger with alligator clips. These UL certified chargers are ideal for charging conventional powersport batteries such as the GT5L-BS, GT7L-BS, GT9L-BS, GT12L-BS, GT14L-BS, GT20L-BS [More Info]
CHG4816CS
$71.99
Charger 48V, 1.6A (1600mA) Standard Polarity. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
CHG3618CS
$66.99
Charger 36V, 1.8A (1800mA) Standard Polarity. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
CHG2410CS
$54.99
Charger 24V, 1A (1000mA) Standard Polarity. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
CHG6025TS
$94.99
Charger 60V 2.5A (2500mA) Standard Polarity with Smart Charge for use with Lead-Acid batteries. Charger plug is a T-prong / T-connector version of a PC plug. [More Info]
CHG3620TS
$64.99
Charger 36V, 2A (2000mA) Standard Polarity with Smart Charge for use with Lead-Acid batteries. Charger plug is a T-prong / T-connector version of a PC plug. [More Info]
CHG4820MT
$74.99
Charger 48V applications (54.6V output), 2A (2000mA), MIC plug/port, for Lithium Ion batteries. UL/ULC approved. This UL/ULC is very important and required legal certification in USA and Canada, caution if price-shopping chargers online. [More Info]
CHGDC3PGX16
$14.99
DC charger adapter. Converting DC2.1 into 3P-GX16 connector profile. [More Info]
BATMF1209L
$59.99
This is a Yimatzu brand GTX9L-BS Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, 12V battery. This is the highest grade of SLA battery produced by Yimatzu and continues to rank as a top performing MF battery in the [More Info]
BLB5400
$16.99
High quality head bulb 12V 100/90W, 3 Prong. Stainless steel lamp holder with transparent quartz glass. H4 12V 100/90W P45T. Most commonly used as head light bulb for a wide variety of applications. [More Info]
CHG3616CS
$64.99
Charger 36V, 1.6A (1600mA) Standard Polarity. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
CHG1210AS
$41.99
Standard Polarity 12V 1.0A (1000mA) Class 2 Battery Trickle Charger with alligator clips. These UL certified chargers are ideal for charging conventional powersport batteries such as the GT5L-BS, GT7L-BS, GT9L-BS, GT12L-BS, GT14L-BS, GT20L-BS [More Info]
CHG4816FS
$74.99
Charger - 48V, 1.6A (1600mA) Standard Polarity. The charger plug is a three port inline female DIN connector, sometimes referred to as a GX16 plug or a GX16-3P plug. [More Info]
CHG2425CS
$68.99
Charger 24V, 2.5A (2500mA) Standard Polarity. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
BATEV12022
$109.99
This is a Yimatzu brand 6-DCM-22 (also referred to as 6-DZM-22, EV12220, 6-EVF-22 and 6-FM-22) Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, specialized [More Info]
CHG7225TS
$94.99
Charger 72V, 2.5A (2500mA) Standard Polarity with Smart Charge for use with Lead-Acid batteries. Charger plug is a T-prong / T-connector version of a PC plug. [More Info]
Charger 72V, 2.5A (2500mA) Reverse Polarity with Smart Charge for use with Lead-Acid batteries. Charger plug is a T-prong / T-connector version of a PC plug. [More Info]
CHGDCGX12
$14.99
DC charger adapter. Converting DC2.1 into GX12 connector profile. [More Info]
BLB7665
$14.99
Light bulb 56V 25W. Dual contact. Duel filament. Pins are offset. [More Info]
CHG4825CS
$84.99
Charger 48V, 2.5A (2500mA) Standard Polarity for use with Lead-Acid batteries. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
CHG3616XS
$64.99
Charger 36V, 1.6A (1600mA) Standard Polarity. Charger plug is a Male Three Pin DIN connector (also referred to as an XLR connector). Pin 1 positive, pin 2 is negative and pin 3 is ground. [More Info]
CHG4816XS
$74.99
Charger 48V, 1.6A (1600mA) Standard Polarity. Charger plug is a Male Three Pin DIN connector (also referred to as an XLR connector). Pin 1 positive, pin 2 is negative and pin 3 is ground. [More Info]
CHG2425CS
$68.99
Charger 24V, 2.5A (2500mA) Standard Polarity. Charger plug is a Three Pin BS EN 60320 C13 connector. Pin configuration from left to right is N+, GND, L-. [More Info]
BATEV12033
$169.99
This is a Yimatzu brand 6-DZM-33 (also referred to as 6-DCM-33, EV12330, 6-EVF-33 and 6-FM-33) Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, [More Info]
BATEV12055
$266.99
This is a Yimatzu brand 6-DZM-55 (also referred to as 6-DCM-55, EV12550, 6-EVF-55 and 6-FM-55) Sealed Lead Acid (SLA), Maintenance Free (MF), AGM class, GEL electrolyte, [More Info]
CHG2420TS
$64.99
Charger 24V, 2A (2000mA) Standard Polarity for use with Lead-Acid batteries. Charger plug is a T-prong / T-connector version of a PC plug. The T-shaped center port of this plug is able to accommodate any style of PC plug. [More Info]
This CDI is most commonly used on 150cc, 200cc and 250cc GY6 format ATVs, dirt bikes, scooters, buggies, go karts as well as other powersports and mobility machines. [More Info]
10A6020
$29.99
This Rectifier (Voltage Regulator) applies to (and is not limited to) 49cc to 150cc GY6 engines. It is most commonly used for 150cc scooters. [More Info]
10A8000
$24.99
Switch for mini ATV. Switch is 2cm wide and the wire length is 70.5cm. Commonly used for but not limited to 50cc to 250cc ATVs and dirt bikes. [More Info]
This racing-style headlight and taillight replaces the original light on most 50cc, 70cc, 90cc, 110cc and 125cc ATVs. Fits most commonly with the racing style plastic kit. [More Info]
10A2051
$39.99
Ignition coil. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A8715
$15.99
E Bike & electric scooter switch - horn. Applies to common scooter brands such as horn for Gio 500W and 800W scooters, Tao Tao dcooters etc. [More Info]
30A1030
$69.99
Suzuki ATV Starter Motor, AG 50. SUZUKI LT-Z 50. Counter clockwise rotation with 10 splines.
[More Info]
30A1240
$69.99
KTM Starter Motor, Vespa 125. KTM 505XCF/SXF/450XCF. Clockwise rotation with 9 splines.
[More Info]
Rectifier (voltage regulator) with 2 yellow connectors for the Baja Wilderness Trail 250 (WD250-U) ATV. Compatible with (but not limited to) 250cc engines. [More Info]
10A2024
$29.99
Ignition coil 150cc GY6 engine, 200cc, 250cc, 2 prong connectors (2.4cm apart), 46.5cm wire length, 52cm total length. This ignition coil has a straight plug. [More Info]
90A5030
$34.99
Brake Shoes for many 50cc - 125cc dirt bikes and 50cc - 300cc ATVs. Approximate dimensions are 8cm in diameter and 2cm thick. **Note: dimensions apply to the part as new, if your part is worn it may alter the dimensions. [More Info]
10A8500
$44.99
Winch Switch - Retraction/release switch in-out. This winch switch profile is commonly applicable for many big brand and lesser brand name machines from all over the world. [More Info]
30A9800
$59.99
Stator / Magneto - Yamaha PW80. G80-F09-A. This stator assembly is most commonly (though not exclusively) used for Yamaha Peewee 80 aka PW80 models produced since 2007. [More Info]
Controller 48V, 20A. Intelligent vector sine wave. Direct replacement for SHOK Scooters Fusion e-bike/e-scooter as well as many other brands and models. [More Info]
This metal ignition key switch features a 3 pin male connector (white) and includes 2 keys. Commonly (though not exclusively) used for Yamaha Cygnus, SPT 150 and similar style scooters. [More Info]
10A2550
$54.99
Starter relay aka starter solenoid for 500cc, 550cc EFI (Electronic Fuel Injected) ATVs. This relay operates in the same way as other non-fuse based relays and [More Info]
10C5660
$139.99
This is a 48V, 30A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
Instrument cluster / instrument panel commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. [More Info]
This magnetor cylinder / stator housing / flywheel rotor is typically found in the Flywheels / Magnetor Assy / Crankshaft Assy & Piston / Magneto Comp. [More Info]
10A2529
$29.99
This starter relay / starter solenoid / power relay is commonly used for a wide range of powersport and mobility machines including ATVs, dirt bikes, scooters, buggies and gokarts. [More Info]
10C9400
$299.99
Electric Motor and wheel hub, 36V, 250W. Most commonly (though not exclusively) used for 250W, 36V electric bicycles (ebikes). [More Info]
30A4640
$39.99
This fuel sensor aka fuel 'float' is used for a wide displacement range of ATVs and UTVs. Most popularly applies to 400cc ATVs and UTVs from companies like Odes and Liangzi. [More Info]
10A6037
$74.99
This Rectifier (Voltage Regulator) applies to (and is not limited to) Honda TRX250 ATVs as well as other interchangeable models and clones. [More Info]
This metal ignition key switch features a 5 pin male connector (white) and includes 2 keys. Commonly (though not exclusively) used for Schwinn S350 profile scooters, 500w, 800W, 1000W etc. [More Info]
30A9322
$137.99
Stator / Magneto coil, 16G, 7 Wire, 15 windings, with backing plate. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the world. [More Info]
60A9222
$8.99
40 amp 32 volt regular blade fuse (ATO) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J1284, JASO D612, ISO 8820-3 and QC/T 420. [More Info]
10A1710
$26.99
Round (cylindrical) 3 wire flasher relay (turn signal relay, aka blinker relay). This relay commonly applies to (and is not limited to) 49cc to 300cc ATVs, dirt bikes, go karts/buggies, golf carts, scooters as well as other powersports, recreational [More Info]
10A8004
$24.99
Switch - Scooter, Horn, Turn Signal, Headlight [More Info]
Circuit Breaker - Push Button, 25A, HT-01C, 125/250VAC, 32/50VDC [More Info]
10A1440
$199.99
Relay assembly. Commonly used for (but not limited to) 400cc and 800cc engines, such as the Hisun 400cc 4x4 ATVs and Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A7382
$229.99
Meter display. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A0026
$79.99
Cut Out Relay (aka. Cut Out Controller, Shut Down Relay or Power Down Relay) for (but not limited to) the Jianshe 250cc and 400cc ATV as well as many other clones, rebrands and similar displacement machines. [More Info]
10C7235
$149.99
This is a 72V, 15T, 35A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
10C1265
$339.99
This is a 60V-120V, 190A/65A, 800W-1500W controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
10S2407
$27.99
Controller 18V, 7A. Direct replacement for SHOK Scooters Electron kick scooter as well as many other brands and models. [More Info]
LCD display cover, covering the control board for the handlebar mounted LCD instrument panel. Control board sold separately. Direct replacement for SHOK Scooters Graviton kick scooters as well as many other brands and models. [More Info]
Controller 48V, 20A. Intelligent vector sine wave. Direct replacement for SHOK Scooters Atomik fat tire mountain ebike as well as many other brands and models. [More Info]
Display / instrument panel. Left mount design. VA segment screen type, vivid under sunlight. 1.8 inch screen size. Supported UART communication type. [More Info]
Hall sensor - motor armature sensor. Direct replacement for SHOK Scooters Fusion hybrid e-bike/e-scooter, SHOK Scooters Atomik fat tire mountain ebike and SHOK Scooters Pulsar fat tire folding step through ebike as well as many other brands [More Info]
10P2080
$29.99
49cc air cooled pocket bike ignition coil. This coil has a wire length of 13cm and the mounting holes are 5.2cm apart center to center. [More Info]
This Rectifier (Voltage Regulator) applies to (and is not limited to) 150cc standard, 150cc GY6 engines, 200cc and 250cc engines. It is most commonly used for 150cc scooters and automatic ATVs, 200cc and 250cc ATVs. [More Info]
10A8130
$39.99
This switch can be used for (but is not limited to) 50-250cc ATVs. Switch is 3.2cm wide and the wire length is 55cm. One 4 pin female connector and 1 3 pin female connector. [More Info]
70A7310
$79.99
This three piece racing-style light kit replaces the original lights on most 50cc - 125cc ATVs. Most commonly used on 110cc and 125cc quads. Fits with the racing style plastic kit. [More Info]
10A6850
$249.99
Main cable assembly. Commonly used for (but not limited to) 400cc, 500cc and 700cc engines, such as the Hisun 400cc, Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
Actuation switch, right hand side. Most commonly used for (but not limited to) 50cc to 300cc ATVs, Dirt Bikes, buggies and scooters. This switch has a large variety of uses though primarily used with a brake lever in order to actuate the brake [More Info]
30A1060
$69.99
Starter Motor, most commonly (though not exclusively) applies to TACT-50, Kymco, DJ50/PGO profiles. Counter clockwise rotation with 11 splines. [More Info]
30A1270
$69.99
Starter Motor, Attila 125. Baja Motorsports/Go Scoot/Jetmoto/Maxam. Clockwise rotation with 9 splines.
[More Info]
10A5595
$44.99
This standard sized CDI has 6 pins (instead of its more popular 5 pin cousin) and is most commonly used for (though not limited to) 50cc to 250cc ATVs and dirt bikes. [More Info]
30A9395
$74.99
30A9306
$54.99
Stator Magneto Coil - C100-6. 5 wire, one four wire female plug and one male push pin. Approximate dimensions:
[More Info]
10A2026
$29.99
Ignition coil. Most commonly (and not exclusively) used for 50cc, 70cc, 90cc 110cc, 125cc, 140cc, 150cc, 155cc engine displacements. For the 2 wire (no plug) version of this product please see our part number 10A2025 and for the single female [More Info]
10A2048
$69.99
This ignition coil is a direct replacement for many models, including but not limited to Suzuki GS125, Yamaha Majesty 250 (year 1999), Yamaha Majesty 250 (year [More Info]
10A8600
$59.99
Winch Dump Switch - Up - Down switch. This winch switch profile is commonly applicable for many big brand and lesser brand name machines from all over the world. [More Info]
30A9800
$59.99
Stator / Magneto - Yamaha PW80. G80-F09-A. This stator assembly is most commonly (though not exclusively) used for Yamaha Peewee 80 aka PW80 models produced since 2007. [More Info]
Electric motor & wheel assembly. 20x4.0 profile. 48V, 500W fat motor with 135mm drop out. Includes mounted motor, rim, rim tape, tube and tire. [More Info]
This rectifier (voltage regulator) is typically found in the Electric Assy / Electric System (Cab) / EFI System / Electrical Parts section of several part manuals. [More Info]
10A4262
$29.99
This metal ignition key switch features a 4 pin female connector (white) and includes 2 keys. Commonly (though not exclusively) used for many configurations of 50cc to 250cc ATVs, dirt bikes, scooters, buggies and carts as well as other powersports [More Info]
30A9535
$309.99
Magneto cylinder / stator housing for (but not limited to) 300cc to 400cc ATVs, dirt bikes, scooters, buggies and other powersports products. [More Info]
10C5661
$119.99
This is a 48V, 30A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
Starter wire / Positive cable, commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. [More Info]
Capacitor, for (but not limited to) 150cc to 400cc ATV's, dirt bikes / pit bikes and scooters. Manufacturer part number 5.3.01.0210. Applies primarily to (but not limited to) Buyang 300cc FA-H300, Gio Bear 300cc, Daymak Grunt 300cc, Midwest [More Info]
10A8816
$34.99
Foot brake light switch, for (but not limited to) 150cc to 400cc ATV's, dirt bikes / pit bikes and scooters. Manufacturer part number 4.3.01. [More Info]
10C9420
$359.99
Electric Motor and wheel hub, 48V, 1000W. Most commonly (though not exclusively) used for 1000W, 48V electric bicycles (ebikes). [More Info]
Ignition coil cable / spark plug cable. Commonly used for (but not limited to) 400cc and 500cc engines, such as the Hisun 500cc 4x4 ATVs and Hisun 400cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A6039
$59.99
This Rectifier / Voltage Regulator applies to (and is not limited to) Honda TRX300 Sportrax models. [More Info]
10A9051
$24.99
This charger plug applies to a wide variety of electric scooters and other machines. Receptacle is a three prong that the scooter charger plugs into. [More Info]
30A9342
$289.99
Stator / magneto coil, 18 coil (aka 'windings'), 5 wire. Most commonly used for (but not limited to) 400cc ATVs such as the Jianshe JS400 Mountain Lion as well as many other clones, rebrands and similar displacement machines. [More Info]
60A9220
$8.99
Purple 35 amp 32 volt regular blade fuse (ATO) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J1284, JASO D612, ISO 8820-3 and QC/T 420. [More Info]
10A1710
$26.99
Round (cylindrical) 3 wire flasher relay (turn signal relay, aka blinker relay). This relay commonly applies to (and is not limited to) 49cc to 300cc ATVs, dirt bikes, go karts/buggies, golf carts, scooters as well as other powersports, recreational [More Info]
10A8006
$24.99
Switch - Scooter, Horn [More Info]
Circuit Breaker - Push Button, 8A, HT-01C, 125/250VAC, 32/50VDC [More Info]
10A1840
$89.99
EPS wire. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A7940
$39.99
Cigarette lighter socket, 12V auxiliary DC socket. Commonly used for (but not limited to) 400cc, 500cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc and Hisun 800cc 4x4 ATVs and Hisun 400cc and Hisun 800cc UTVs, [More Info]
10A0025
$69.99
Shut Down Relay (aka. Cut Out Relay, Shut Down Relay or Power Down Relay) for (but not limited to) the Jianshe 250cc and 400cc ATV as well as many other clones, rebrands and similar displacement machines. [More Info]
10C7255
$189.99
This is a 72V, 24T, 55A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
10C1250
$309.99
This is a 60V-120V, 180A/50A, 800W-1500W controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
10S3117N
$43.99
Controller 31V, 15A. Direct replacement for SHOK Scooters Neutron kick scooter as well as many other brands and models. [More Info]
70S9285
$26.99
Pedal assist sensor (PAS) / step frequency speed sensor, 150mm length. Direct replacement for SHOK Scooters Pulsar fat tire folding step-through ebike as well as many other brands and models. [More Info]
Display cable / instrument panel plug. Direct replacement for SHOK Scooters Triode fat tire trike / 3-wheel electric bike (e-bike) and Nova step-through (step-thru) electric city bike / e-bike as well as many other brands and models in the open [More Info]
Electric Motor armature, 48V, 500W (for 190mm dropout). Direct rear wheel replacement for SHOK Scooters Atomik fat tire mountain ebike as well as many other brands and models in the open market. [More Info]
30A9390
$109.99
Stator / Magneto Coil - GS18. Approximate dimensions:
[More Info]
This Rectifier (Voltage Regulator) applies to (and is not limited to) 150cc standard, 150cc GY6 engines, 200cc and 250cc engines. It is most commonly used for 150cc scooters and automatic ATVs, 200cc and 250cc ATVs. [More Info]
10A8110
$39.99
This switch is commonly used for (but is not limited to) 50cc to 250cc ATV. The total wire length is 90cm.
[More Info]
30A9320
$69.99
Stator / Magneto Coil - CB6. Approximate dimensions:
[More Info]
This electric choke carburetor is typically found in the Carburetor / Air Cleaner section of several part manuals. Commonly used for but not limited to GY6 / 300cc, and 330 engines. [More Info]
30A9515
$49.99
This Magneto Cylinder / Stator Housing is the most common design used for GY6 50cc ATVs, dirt bikes scooters etc. CFW50
[More Info]
30A1070
$69.99
ATV/Scooter /Go Cart Starter Motor, SM125. Aprilia SR 125. Counter clockwise rotation with 9 splines.
[More Info]
30A1280
$79.99
This starter motor unit with 13 splines / teeth is typically found in the Starter Motor section of several part manuals. Commonly used for but not limited to [More Info]
90A8210
$49.99
This set of durable, heat-treated steel tools are most commonly (but not exclusively) used as to adjust engine gears. [More Info]
60A9120
$6.99
Blue 15 amp 32 volt mini blade fuse (APM / ATM) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J2077, JASO, D612, ISO 8820-3 and QC/T 420. [More Info]
10A8900
$34.99
Range Switch - Power Range Switch. This single stage range switch button is most commonly used for (but not limited to) Chironex Spartan 500cc and 600cc UTVs (4x4/2x4 and similar variations), Xinyang 500cc - 600cc ATVs and UTVs (4x4/2x4 and [More Info]
10A5315
$99.99
Digital CDI. Most commonly (though not exclusively) used for 500cc ATVs and UTVs from companies like Kazuma, Xingyang and many others. Case dimensions are L-9. [More Info]
Combination meter, digital instrument cluster. 3 bolt mount. Similar to part number 10A7301. This instrument cluster is most commonly (but not exclusively) used for 400cc ATVs like the Odes 400cc 4x4 ATV and the Liangzi 400cc 4x4 ATV. [More Info]
This metal ignition key switch features a 4 pin male connector (white) and includes 2 keys. Commonly (though not exclusively) used for 50cc and other small profile scooters. [More Info]
30A9555
$399.99
Magneto cylinder aka stator housing for 500cc, 550cc EFI (Electronic Fuel Injected) ATVs. Most commonly used for (but not limited to) Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV as well as many other clones, [More Info]
10C5652
$109.99
This is a 48V, 25A controller with hall configuration. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
Starter wire / Negative cable, commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. [More Info]
Gear sensor assembly for (but not limited to) 150cc to 400cc ATV's, dirt bikes / pit bikes and scooters. Manufacturer part number 5.3.01.0441. [More Info]
10A8980
$23.99
This hazard switch / emergency switch is commonly used for a wide range of ATVs and UTVs. Most popularly applies to the Odes and Kangdi (Kandi) 800cc UTVs. [More Info]
10C9415
$339.99
Electric Motor and wheel hub, 48V, 750W. Most commonly (though not exclusively) used for 750W, 48V electric bicycles (ebikes). [More Info]
Brake cable switch that activates the brake lights. Commonly used for (but not limited to) 400cc, 500cc and 800cc engines, such as the Hisun 400cc and Hisun 500cc 4x4 ATVs and Hisun 400cc and Hisun 800cc UTVs, as well as many other clones, rebrands [More Info]
60A9118
$6.99
Red 10 amp 32 volt mini blade fuse (APM / ATM) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J2077, JASO, D612, ISO 8820-3 and QC/T 420. [More Info]
10A6041
$74.99
This Rectifier (Voltage Regulator) applies to (and is not limited to) Honda TRX400 ATVs as well as other interchangeable models and clones. [More Info]
10A9060
$24.99
This charger plug is common (though not exclusively) used for electric scooters in the 150W, 250W, 350W, 500W, 800W range. Voltage is rated for 12V, 24V and 36V. [More Info]
10A2581
$49.99
Starter relay / Starter solenoid. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs as well as many other clones, rebrands and similar displacement machines. [More Info]
60A9218
$8.99
Green 30 amp 32 volt regular blade fuse (ATO) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J1284, JASO D612, ISO 8820-3 and QC/T 420. [More Info]
10A1715
$26.99
Round (cylindrical) 3 wire flasher relay (turn signal relay, aka blinker relay). This relay commonly applies to (and is not limited to) 49cc to 300cc ATVs, dirt bikes, go karts/buggies, golf carts, scooters as well as other powersports, recreational [More Info]
10A8008
$24.99
Switch - Scooter, Horn, Turn Signal, Headlight [More Info]
Circuit Breaker - Push Button, 10A, HT-01C, 125/250VAC, 32/50VDC [More Info]
10A1650
$58.99
Breaker assembly. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A7980
$49.99
12V auxiliary DC socket. Commonly used for (but not limited to) 400cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 700cc and Hisun 800cc 4x4 ATVs and Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement [More Info]
30A9560
$209.99
Magneto Cylinder. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the world. [More Info]
10A7194
$179.99
Controller commonly (but not exclusively) used for 500cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies.
[More Info]
10C7270
$309.99
This is a 72V, 30T, 70A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
10C7210
$279.99
This is a 60V-72V, 220A/100A, 1000W-2000W controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
10S3117P
$69.99
Controller 31V, 17A. Direct replacement for SHOK Scooters Proton kick scooter as well as many other brands and models. [More Info]
70S9285
$26.99
Pedal assist sensor (PAS) / step frequency speed sensor, 150mm length. Direct replacement for SHOK Scooters Pulsar fat tire folding step-through ebike as well as many other brands and models. [More Info]
Display cable / instrument panel plug. Direct replacement for SHOK Scooters Triode fat tire trike / 3-wheel electric bike (e-bike) and Nova step-through (step-thru) electric city bike / e-bike as well as many other brands and models in the open [More Info]
Electric Motor armature, 48V, 500W (for 175mm dropout). Direct replacement for SHOK Scooters Pulsar fat tire folding step-through ebike as well as many other brands and models. [More Info]
This Rectifier (Voltage Regulator) applies to (and is not limited to) 49cc, 50cc, 70cc, 90cc, 110cc, 125cc, 140cc, 150cc engines. It is most commonly used for 110cc and 125cc ATVs as well as many smaller displacements of scooters, dirt bikes [More Info]
This Magneto Cylinder / Stator Housing is the most common design used for 50cc 70cc 90cc 110cc and 125cc ATV engines and electric start dirt bikes. [More Info]
30A9040
$89.99
This 125cc high output / high performance stator is applicable (and not limited) to 90cc to 250cc dirt bikes, most commonly used for 125cc and 140cc pit bikes. [More Info]
10A8100
$34.99
This switch applies to (but is not limited to) 50cc to 250cc ATVs as well as various models of electric and gas scooters. The total wire length is 62cm. [More Info]
30A9315
$69.99
Stator / Magneto Coil - WY8. Approximate dimensions:
[More Info]
30A9520
$49.99
This Magneto Cylinder / Stator Housing applies to (but is not exclusively used for) GY6 125 - 150cc ATVs, dirt bikes and scooters. CFW-125YX, CFW-150YX. [More Info]
30A1080
$69.99
This starter motor with 9 splines / teeth is typically found in the Starter Motor section of several part manuals. Commonly used for but not limited to 50cc, [More Info]
This starter motor is typically found in the Starter Motor / Starting Motor / Electrical Starting Assy / Electrical Starter Assy / Electrical Start Propeller section of several part manuals. [More Info]
60A9116
$6.99
Brown 7.5 amp 32 volt mini blade fuse (APM / ATM) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J2077, JASO, D612, ISO 8820-3 and QC/T 420. [More Info]
Rectifier (voltage regulator). Total case dimensions are 9.1cm x 9.3cm x 3cm. Plug profile is a 3 slot + 3 slot with pin configuration of 3 pin + 2 pin. [More Info]
10A7600
$24.99
Diode - Severance Diode, SY342. This diode is most commonly used for (but not limited to) Chironex Spartan 500cc and 600cc UTVs (4x4/2x4 and similar variations), Xinyang 500cc - 600cc ATVs and UTVs (4x4/2x4 and similar variations). [More Info]
10A5320
$69.99
Common digital CDI works for many models of dirt bikes and motorcycles including the Yamaha YBR125 lineup.
Case dimensions are 6.9cm x 4.8cm x 2. [More Info]
Display / instrument panel. Left mount design, EN06 Profile. VA segment screen type, vivid under sunlight. 2.0 inch screen size. Supported UART communication type and USB Type-A charge port. [More Info]
10A7394
$79.99
Multi-Feature Display most commonly (though not exclusively) used for a wide variety of 48V electrical bicycles (e-bikes). Considered one of the most common profiles. [More Info]
This metal ignition key switch features a 4 pin male connector (white) and includes 2 keys. Commonly (though not exclusively) used for 50cc to 150cc scooters. [More Info]
30A9152
$109.99
Stator, for (but not limited to) 150cc to 300cc ATV's, Dirt Bike and Pit bikes. Manufacturer part number 2.1.01.2060 and 2.1.01.2010. Applies primarily to (but not limited to) Buyang 300cc FA-H300, Gio Bear 300cc, Daymak Grunt 300cc, Midwest [More Info]
10C5653
$109.99
This is a 48V, 25A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
Metal ignition key switch with lockable gas cap commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. [More Info]
10A8060
$34.99
Kill switch with safety tether commonly used for kids atv's, dirt bikes and other kids powersports toys. Universally mountable and most popularly installed on the back of kids or youth ATVs. [More Info]
10A9600
$24.99
Electric motor cable, waterproof, 9 pin. Most commonly (though not exclusively) used for the electric motors (built-in wheel hub motors) on E-Bikes and electric scooters. [More Info]
10C9410
$319.99
Electric Motor and wheel hub, 48V, 500W. Most commonly (though not exclusively) used for 500W, 48V electric bicycles (ebikes). [More Info]
10A6240
$39.99
Horn. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
60A9320
$10.99
Blue 15 amp 32 volt mini blade fuse (APM / ATM) constructed with PE66 and silver plated zinc alloy terminals. 10 pieces. Complies with SAE J2077 and ISO 8820-3. [More Info]
10A5015
$34.99
This CDI (capacitive discharge ignition) box is typically found in the Electric System section of several part manuals. Commonly used for but not limited to GY6, 4-stroke, 50cc, 100cc, 125cc, and 150cc engines. [More Info]
30A9381
$89.99
This stator / magneto coil, 18G (18 coils, 3-wire) is typically found in Crankshaft Assy & Piston / Flywheels / Magngeo Comp. / Magnetor Assy / Stator and Flywheel [More Info]
60A9124
$6.99
Clear 25 amp 32 volt mini blade fuse (APM / ATM) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J2077, JASO, D612, ISO 8820-3 and QC/T 420. [More Info]
60A9216
$8.99
Clear 25 amp 32 volt regular blade fuse (ATO) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J1284, JASO D612, ISO 8820-3 and QC/T 420. [More Info]
10A1715
$26.99
Round (cylindrical) 3 wire flasher relay (turn signal relay, aka blinker relay). This relay commonly applies to (and is not limited to) 49cc to 300cc ATVs, dirt bikes, go karts/buggies, golf carts, scooters as well as other powersports, recreational [More Info]
10A8010
$24.99
Switch - Scooter, Horn, Turn Signal, Headlight [More Info]
Circuit Breaker - Push Button, 15A, HT-01C, 125/250VAC, 32/50VDC [More Info]
10A3280
$79.99
Speed sensor. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs and Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A7980
$49.99
12V auxiliary DC socket. Commonly used for (but not limited to) 400cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 700cc and Hisun 800cc 4x4 ATVs and Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement [More Info]
10A7428
$22.99
Gear sensor assembly / Idle switch. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the world. [More Info]
10A7396
$119.99
LED display for electrical bicycle. [More Info]
10A4660
$499.99
This ECU controller is typically found in the EFI System / Electric Assy / Electrical System section of several part manuals. Commonly used for but not limited to 196S / 600cc, and 625cc engines. [More Info]
10C7265
$229.99
This is a 60V-72V, 190A/65A, 800W-1500W controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
70S3215
$29.99
Hand Throttle & Display Assembly. Direct replacement for SHOK Scooters Electron kick scooters as well as many other brands and models. [More Info]
70S9185
$26.99
Pedal assist sensor (PAS) / step frequency speed sensor, 300mm length. Direct replacement for SHOK Scooters Atomik fat tire mountain ebike as well as many other brands and models. [More Info]
10A2020
$34.99
Ignition coil 150cc GY6 engine, 200cc, 250cc 2 prong connectors (1.8cm apart), 50cm wire length, 55cm total length.
[More Info]
30A9030
$49.99
This is a Stator / Magneto Coil which applies to (and is not limited to) 50cc 70cc 90cc 110cc 125cc automatic ATV and Dirt Bike engines. Most commonly used for 50cc to 125cc ATVs, this is the second of two very popular stator configurations [More Info]
10A5120
$34.99
A less common model, this standard sized CDI has 4 pins (instead of its more popular 5 pin cousin) and is most commonly used for (though not limited to) 50cc to 250cc ATVs and dirt bikes. [More Info]
10A2019
$34.99
This ignition coil is commonly used for a wide range of powersport and mobility machines including ATVs, dirt bikes, scooters, buggies and gokarts. [More Info]
30A9310
$64.99
Stator / Magneto Coil - GY6-6. Approximate dimensions:
[More Info]
90A8250
$44.99
This set of durable, heat-treated steel tools are the ideal solution for removing a magneto cylinder. [More Info]
30A1100
$69.99
ATV/Scooter Starter Motor, ZY-125. YMH Majesty 125. Counter clockwise rotation with 9 splines.
[More Info]
30A1300
$79.99
SUZUKI Starter Motor, GN250. SUZUKI LT250E/LT300E. Counter clockwise rotation with 9 splines.
[More Info]
60A9114
$5.99
Tan 5 amp 32 volt mini blade fuse (APM / ATM) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J2077, JASO, D612, ISO 8820-3 and QC/T 420. [More Info]
This 4 Pole Magneto Cylinder applies to (and is not limited to) 50cc 70cc 90cc 110cc and 125cc electric start automatic engines. Most commonly used for 125cc electric start ATVs, dirt bikes and buggies/go-karts. [More Info]
This starter relay / starter solenoid operates the same way as unfused-based relays. Bolt studs are 2cm apart center to center. This component is typically found [More Info]
10A5515
$39.99
Common motorcycle CDI works for many models of dirt bikes and motorcycles including the Yamaha PW80. Case dimensions are 3.6cm x 4cm x 3cm. [More Info]
1T5 bus cable, 1000mm base cable with 4 way split. Total length from split is 100mm for display, 120mm for front brakes, 120mm for rear brakes, and 250mm for throttle. [More Info]
30A1601
$14.99
This starter cable is most commonly (though not exclusively) used for electric start 150cc, 200cc and 250cc ATVs, dirt bikes, go karts, scooters, buggies etc. [More Info]
30A9351
$74.99
Stator - Magneto Coil, CG11, 7 Wire. Approximate dimensions:
[More Info]
This metal ignition key switch features a 4 pin male connector (white) and includes 2 keys. Commonly (though not exclusively) used for Dayang Cub style scooters. [More Info]
Stator coil aka magneto coil for 500cc, 550cc EFI (Electronic Fuel Injected) ATVs. Most commonly used for (but not limited to) Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV as well as many other clones, [More Info]
30A9536
$79.99
This magneto cylinder / stator housing applies to (and is not limited to) 150cc to 400cc engines. Most commonly used for 260cc and 300cc ATVs, dirt bikes, scooters, buggies and other motorized vehicles from a wide range of manufacturers. [More Info]
10A6295
$29.99
Universal 12V horn. Can be used on a very wide range of machines, and displacements, from 50cc ATVs to 1500cc UTVs, as long as the voltage matches. [More Info]
30A4655
$54.99
Fuel sensor aka fuel 'float' for 500cc, 550cc EFI (Electronic Fuel Injected) ATVs. Most commonly used for (but not limited to) Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV as well as many other clones, [More Info]
10A9600
$24.99
Electric motor cable, waterproof, 9 pin. Most commonly (though not exclusively) used for the electric motors (built-in wheel hub motors) on E-Bikes and electric scooters. [More Info]
10C9405
$309.99
Electric Motor and wheel hub, 48V, 350W. Most commonly (though not exclusively) used for 350W, 48V electric bicycles (ebikes). [More Info]
10A1940
$27.99
High voltage cable. Commonly used for (but not limited to) 400cc and 800cc engines, such as the Hisun 400cc and Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
60A9322
$10.99
Yellow 20 amp 32 volt mini blade fuse (APM / ATM) constructed with PE66 and silver plated zinc alloy terminals. 10 pieces. Complies with SAE J2077 and ISO 8820-3. [More Info]
10A5022
$34.99
This CDI applies to (and is not limited to) Honda XR200 dirt bikes as well as other interchangeable models and clones. [More Info]
30A9425
$24.99
This stator ignition pick up, trigger pulsar coil is typically found in Flywheels / Magnetor Assy / Crankshaft Assy & Piston / Magngeo Comp. [More Info]
60A9122
$6.99
Yellow 20 amp 32 volt mini blade fuse (APM / ATM) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J2077, JASO, D612, ISO 8820-3 and QC/T 420. [More Info]
60A9214
$8.99
Yellow 20 amp 32 volt regular blade fuse (ATO) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J1284, JASO D612, ISO 8820-3 and QC/T 420. [More Info]
10A1740
$199.99
Flasher Relay / Turn Signal Relay. Commonly used for (but not limited to) 400cc and 800cc engines, such as the Hisun 400cc and Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A8070
$24.99
Switch - Scooter, 3 Speed Control Switch [More Info]
Circuit Breaker - Push Button, 20A, HT-01C, 125/250VAC, 32/50VDC [More Info]
10A7426
$29.99
This speed sensor & display cable (connection cable/meter wire) is used for a wide displacement range of ATVs and UTVs. Most popularly applies to 400cc ATVs and UTVs from companies like Odes and Liangzi. [More Info]
10A9750
$49.99
Negative battery cable. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A7196
$229.99
Conversion Relay, four to two wheel drive. Commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements [More Info]
10A6654
$699.99
Wiring Harness, ECU Control Cable. This wiring harness is most commonly used for (but not limited to) Xinyang (XY) Spartan 500cc XY500L-S and 600cc UTVs (4x4/2x4 and similar variations), and Chironex XY500L-S UTVs (4x4/2x4 and similar variations).
Common [More Info]
This rear brake light switch is typically found in Brake System / Hydraulic Brake Assy section of several part manuals. Commonly used for but not limited to 400cc, 500cc, 600cc, 625cc, and 800cc engines. [More Info]
10A1780
$24.99
2-pin Hitpoint brand buzzer, part number PF-27N29EPQ. [More Info]
70S9185
$26.99
Pedal assist sensor (PAS) / step frequency speed sensor, 300mm length. Direct replacement for SHOK Scooters Atomik fat tire mountain ebike as well as many other brands and models. [More Info]
10A5020
$26.99
This is a 150cc to 250cc CDI. This is the most commonly used CDI and applies to (and is not limited to) 150cc to 250cc machines with this 6 pin oval plug configuration. [More Info]
This 6 Pole Magneto Cylinder applies to (and is not limited to) 50cc 70cc 90cc 110cc and 125cc electric start automatic engines. Most commonly used for 125cc electric start ATV's, dirt bikes and buggies/go-karts. [More Info]
30A9375
$64.99
Stator / Magneto Coil - CG12, 5 Wire. Stator has a 3 wire female plug and 2 wires with bullet connectors. Approximate dimensions:
[More Info]
30A9000
$49.99
This is a Stator / Magneto Coil which applies to (and is not limited to) 50cc 70cc 90cc 110cc 125cc, 140cc and 150cc manual shift and automatic ATV and Dirt Bike engines. [More Info]
10A5570
$39.99
This Yimatzu performance CDI applies to (and is not limited to) 125cc 150cc 200cc and 250cc engines. Most commonly used for 150 to 250cc ATVs, dirt bikes, scooter and go-karts/buggies. [More Info]
30A9305
$59.99
Stator Magneto Coil - C100-6, 5 wire. Approximate dimensions:
[More Info]
60A9020
$8.99
Glass Fuse 20A. 10 pieces.
[More Info]
30A1120
$69.99
ATV/Scooter/SUZUKI Starter Motor, GN-125. Suzuki GN/DR125. Counter clockwise rotation with 9 splines.
[More Info]
30A1265
$159.99
Starter motor assembly. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV, Feishen 550cc ATV as well as many other clones, [More Info]
60A9112
$6.99
Violet 3 amp 32 volt mini blade fuse (APM / ATM) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J2077, JASO, D612, ISO 8820-3 and QC/T 420. [More Info]
90A82595
$99.99
This is an all purpose magneto cylinder removal combination tool kit. This kit is most commonly used for (but not limited to) JH70, DY100, GY6125 and GY6150 class engines. [More Info]
10A7000
$299.99
Fuse Box - XY500UE, XY600UE, UTV. This fuse box is most commonly used for (but not limited to) Chironex Spartan 500cc and 600cc UTVs (4x4/2x4 and similar variations), Xinyang 500cc - 600cc ATVs and UTVs (4x4/2x4 and similar variations). [More Info]
60A3100
$49.99
Speaker - XY500UE and XY600UE. Associated parts are speaker cover 60A3101 and mp3 control unit 10A8250.
This speaker profile is commonly applicable for many big brand and lesser brand name machines from all over the world. [More Info]
30A9328
$64.99
Stator / Magneto Coil - Yamaha PW50. Commonly used for (but not limited to) direct replacement magneto cylinder for PW50 (Yamaha Pewee 50) and other similarly configured kids or youth machines. [More Info]
70S9070
$74.99
Battery Management System (BMS), 48V, 30A, continuous, for lithium ion battery. Direct replacement for SHOK Scooters Fusion hybrid e-bike/e-scooter, SHOK Scooters [More Info]
30A9307
$54.99
Stator Magneto Coil - C100-6. 5 wire, one 4 pin 3 wire male plug and two male push pin wires. Approximate dimensions:
[More Info]
This metal ignition key switch features a 4 pin male connector (white) and includes 2 keys. Commonly (though not exclusively) used for 50cc to 150cc scooters including many configurations such as the Sicily, MC, Retro, Metro, Roketa and similar [More Info]
10A2052
$79.99
Ignition coil for 500cc, 550cc EFI (Electronic Fuel Injected) ATVs. This coil is most commonly used for (but not limited to) Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV as well as many other clones, rebrands [More Info]
10A5302
$139.99
This CDI (9000 RPM) is typically found in the Wire Harness / Electrical / Electrical Equipment System section of several part manuals. Commonly used for but not limited to 260cc engines. [More Info]
10P2082
$29.99
Ignition coil. Most commonly (though not exclusively) used 49cc air cooled pocket bikes, mini bikes, scooters and other powersports and personal transportation products. [More Info]
30A1380
$289.99
This starter is commonly used for a wide range of ATVs and UTVs. Most popularly applies (though not limited to) the Odes and Kangdi (Kandi) 800cc UTVs. [More Info]
10A9700
$25.99
Battery / Battery Box cable most commonly (though not exclusively) used for electric scooters and electric bicycles (ebikes). [More Info]
10A6044
$109.99
Rectifier (voltage regulator). Commonly used for (but not limited to) 400cc, 500cc and 700cc engines, such as the Hisun 400cc, Hisun 500cc and Hisun 700cc 4x4 ATVs and Hisun 400cc UTVs, as well as many other clones, rebrands and similar displacement [More Info]
60A9326
$10.99
Green 30 amp 32 volt mini blade fuse (APM / ATM) constructed with PE66 and silver plated zinc alloy terminals. 10 pieces. Complies with SAE J2077 and ISO 8820-3. [More Info]
10A5032
$39.99
This CDI applies to (and is not limited to) Honda TRX 300 ATVs as well as other interchangeable models and clones. [More Info]
30A1315
$199.99
Starter motor / Stater assembly. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the world. [More Info]
60A9126
$6.99
Green 30 amp 32 volt mini blade fuse (APM / ATM) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J2077, JASO, D612, ISO 8820-3 and QC/T 420. [More Info]
60A9212
$8.99
Blue 15 amp 32 volt regular blade fuse (ATO) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J1284, JASO D612, ISO 8820-3 and QC/T 420. [More Info]
10A1740
$199.99
Flasher Relay / Turn Signal Relay. Commonly used for (but not limited to) 400cc and 800cc engines, such as the Hisun 400cc and Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A8012
$34.99
Switch - Scooter, Headlight, Lever [More Info]
Circuit Breaker - Push Button, 25A, HT-01C, 125/250VAC, 32/50VDC [More Info]
10A3281
$69.99
Speed sensor. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A9780
$59.99
Negative battery cable. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
30A1400
$409.99
Starter (aka starter motor / starting motor) commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. [More Info]
10A4282
$69.99
Ignition Switch / Ignition Key Switch. Commonly used for (but not limited to) 500cc, 700cc and 800cc engines, such as the Hisun 500cc UTVs, 700cc UTVs and 800cc UTVs as well as many other clones, rebrands and similar displacement machines. [More Info]
30A1360
$169.99
Genuine CF Moto Starter Motor is typically found in the Starting Motor / Electric Starting section of CF Moto part manuals. Commonly used for but not limited to 400cc, 450cc and 550cc engines. [More Info]
Display / instrument panel. Left mount design, G51 Profile. Size 48.1mm x 82.1mm x 12.5mm with approximately 2.0 inch screen size. Supported UART communication type. [More Info]
Controller / control unit, 36V. Direct replacement brushless hub motor controller for SHOK Motors SX12 kids 12 inch balance bikes as well as many other brands and models in the open market. [More Info]
10A5010
$24.99
CDI 50cc, 70cc, 90cc 110cc, 125cc 5 pin plug (green-6 slot, 5 pin/1 gap). Casing is 6.5cm x 3.8cm x 2.2cm. Plug is 1.8cm x 1.5 cm. [More Info]
10A8156
$74.99
30A9051
$59.99
Magneto Coil (Stator) for 50cc GY6 style 4-stroke engines. 8 Pole, 4 wire for standard DC fired ignition systems. [More Info]
30A9010
$49.99
This Stator / Magneto Coil applies to (and is not limited to) 50cc, 70cc, 90cc, 110cc, and 125cc automatic ATVs, buggies/go karts, dirt bikes and other powersports and mobility products. [More Info]
10A4204
$37.99
This metal ignition key switch features a 4 pin female connector (white) and includes 2 keys. Fits many 50cc to 250cc ATVs, Dirt Bikes, Scooters, and more. [More Info]
10A2530
$24.99
Relay 3A 12V AG50. This motorcycle relay fits SUZUKI AG50 and other suitable models requiring strong ignition power. Inlet angle stability, stable ignition performance in both high and low speed. [More Info]
10C9500
$199.00
Electric Motor - Hub, E-Bike. Most commonly used for (but not limited to) Gio (Giovanni) electric scooters. Hub has a diameter of 23.8cm and 7. [More Info]
This starter motor with 9 splines is typically found in the Starter Motor / Starting Motor section of several part manuals. Commonly used for but not limited to 125cc and 150cc engines. [More Info]
30A1310
$79.99
Direct replacement starter for Can-Am DS90 ATV, Honda TRX90, Honda 90EX, Honda 90X. Shares the same profile with models found on other powersport vehicles such as Eagle, Go Scoot, Jetmoto and many others, though it is a higher quality intended [More Info]
10A8815
$19.99
Brake cable switch that activates the brake lights for 50cc to 250cc atv's. This cable works with 70A2320 brake lever and throttle assembly. [More Info]
60A9110
$6.99
Grey 2 amp 32 volt mini blade fuse (APM / ATM) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J2077, JASO, D612, ISO 8820-3 and QC/T 420. [More Info]
90A8260
$44.99
This durable heat-treated steel tool most commonly applies to (but is not limited to) 50cc, 70cc, 90cc, 110cc and 125cc engines (including JH70 varieties) as well as some variations of 150cc, 200cc and 250cc motors. [More Info]
This ECU controller / inboard computer is typically found in the Electric System / EFI Systems / Seat Assy / Denso Assembly KL500-B-170000 KL600-B-170000 section of several part manuals. [More Info]
60A3101
$19.99
Speaker Cover with associated speaker 60A3100 and associated MP3 player swtich 10A8250. This speaker cover profile is commonly applicable for many big brand and lesser brand name machines from all over the world. [More Info]
10A6025
$39.99
Rectifier - Voltage Regulator, Yamaha PW80. G80-F30-10 [More Info]
70S9085
$229.99
Electric Motor, 48V, 500W with 135mm drop out. Direct replacement for SHOK Scooters Fusion hybrid e-bike/e-scooter as well as many other brands and models in the open market. [More Info]
30A9361
$69.99
Stator / Magneto Coil - CG8. 5 wire, one 4 pin 3 wire male plug and two male push pin wires. Approximate dimensions:
[More Info]
This metal ignition key switch features a 4 pin male connector (white) and includes 2 keys. Commonly (though not exclusively) used for 50cc to 150cc scooters including many configurations such as the Keeway, Roketa, Diamo, BMS, Sonic and similar [More Info]
10A6126
$299.99
Rectifier (voltage regulator) for 500cc, 550cc EFI (Electronic Fuel Injected) ATVs. This rectifier is most commonly used for (but not limited to) Chironex Bandito [More Info]
10A2512
$29.99
This starter relay applies to (and is not limited to) 150cc to 400cc engines. Most commonly used for 260cc and 300cc ATVs, dirt bikes, scooters, buggies and other motorized vehicles from a wide range of manufacturers. [More Info]
10A8150
$84.99
Left handle switch assembly. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner [More Info]
30A1680
$24.99
This starter cable / engine starter wire is commonly used for a wide range of ATVs and UTVs. Most popularly applies to the Odes and Kangdi (Kandi) 800cc UTVs. [More Info]
10A9700
$25.99
Battery / Battery Box cable most commonly (though not exclusively) used for electric scooters and electric bicycles (ebikes). [More Info]
10A7356
$249.99
Meter display. Commonly used for (but not limited to) 400cc, 500cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc and Hisun 800cc UTVs as well as many other clones, rebrands and similar displacement machines. [More Info]
10A4232
$59.99
Ignition Switch / Ignition Key Switch. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
30A9389
$169.99
Stator / Magneto coil, 18G, 5 Wire. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A5042
$39.99
This CDI applies to (and is not limited to) Honda TRX 400 ATVs as well as other interchangeable models and clones. [More Info]
60A9128
$6.99
Purple 35 amp 32 volt mini blade fuse (APM / ATM) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J2077, JASO, D612, ISO 8820-3 and QC/T 420. [More Info]
10A6012
$49.99
This rectifier / voltage regulator applies to (and is not limited to) Yamaha TTR50 dirt bikes as well as other interchangeable models and clones. [More Info]
60A9432
$19.99
Circuit Breaker - 32A, FULL [More Info]
Circuit Breaker - Push Button, 30A, HT-01C, 125/250VAC, 32/50VDC [More Info]
10A3880
$79.99
Emergency light controller. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A9740
$49.99
Negative battery cable. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A8142
$119.99
This handle bar mounted switch is often referred to as "instrument switch", "light switch" "starter switch" and many other names. Most commonly (but not exclusively) used for 400cc ATVs from companies like Odes and Liangzi. [More Info]
10A2037
$39.99
This ignition coil applies to (and is not limited to) Yamaha YFM80/125/600/660 models. Common across a wide range of Yamaha products. [More Info]
10A5250
$149.99
CDI box most commonly used for (but not limited to) 400cc ATVs such as the Jianshe JS400 Mountain Lion and Baja 400cc as well as many other clones, rebrands and similar displacement machines. [More Info]
70S9120
$35.99
1T5 bus cable, 900mm base cable with 4 way split. Total length from split is 50mm for display, 80mm for front brakes, 80mm for rear brakes, and 250mm for throttle. [More Info]
10A2025
$29.99
Ignition coil, commonly applies to 50cc-3000cc displacement ATVs, dirt bikes, go karts, buggies, scooters as well as other powersports and mobility products. [More Info]
10A5500
$36.99
This is a 150cc to 250cc DC CDI. Most commonly applies to (and is not limited to) 150cc to 250cc machines with this 6 pin rectangular plug configuration where the regular 6 pin CDI does not apply. [More Info]
30A9151
$49.99
Magneto Coil (Stator) for 50cc-250cc GY6 style 4-stroke ATVs. Most commonly found on the 125cc and 150cc GY6 motors. Approximate dimensions: Mounting hole distance of 4. [More Info]
10A5110
$34.99
Common motorcycle CDI works for many models of dirt bikes and motorcycles including the Yamaha JOG 50cc. Case dimensions are 3.6cm x 4.2cm x 3. [More Info]
10A4210
$39.99
This plastic momentary spring return ignition key switch features a 5 pin 5 wire male connector (white) and includes 2 keys. Fits many 50cc to 250cc ATVs, Dirt Bikes, Scooters, Go-Karts and more. [More Info]
30A1140
$69.99
ATV/Scooter Starter Motor, LD-125. Piaggio leader 125. Counter clockwise rotation with 9 splines.
[More Info]
10C9550
$259.99
Electric Motor - Hub, E-Bike,500W electric motor hub. Approximate hub outer diameter of 32.5cm with an approximate width from outer lip to lip of 40mm. [More Info]
30A9250
$59.99
Stator / Magneto Coil - CB8, WY125 5-wire. Approximate dimensions:
[More Info]
Hand throttle, twist grip throttle assembly set (left and right, 2pcs total). This throttle assembly is commonly used for electric scooters of all sizes. [More Info]
10A7100
$149.99
Conversion Relay - Four to Two Drive, XY500UE, XY600UE, UTV. This conversion relay is most commonly used for (but not limited to) Chironex Spartan 500cc and 600cc UTVs (4x4/2x4 and similar variations), Xinyang 500cc - 600cc ATVs and UTVs (4x4/2x4 [More Info]
10A9900
$329.99
Wiper Motor - 12V, corresponds with (but not limited to) wiper blades 60A3200. This windshield wiper motor profile is commonly applicable for many big brand and lesser brand name machines from all over the world. [More Info]
10A5520
$39.99
CDI - Yamaha PW50. PW50T-F26-01 [More Info]
30A9356
$74.99
This metal ignition key switch features a 4 pin male connector (white) and includes 2 keys. Commonly (though not exclusively) used for 50cc to 150cc style scooters, for machines such as JONWAY YY50QT-5, ZNEN ZN50QT-A, TAOTAO, RETRO, CY50B, VETAS [More Info]
10C5622
$109.99
This is a 36V, 22A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters with hall configuration. [More Info]
30A9398
$99.99
This stator / magneto coil applies to (and is not limited to) 150cc to 400cc engines. Most commonly used for 260cc and 300cc ATVs, dirt bikes, scooters, buggies and other motorized vehicles from a wide range of manufacturers. [More Info]
10A7050
$99.99
Fuse box for 500cc, 550cc EFI (Electronic Fuel Injected) ATVs. Most commonly used for (but not limited to) Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV as well as many other clones, rebrands and similar [More Info]
10A4580
$349.99
10A7399
$59.99
This gear indicator is commonly used for a wide range of powersport and mobility machines including ATVs, dirt bikes, scooters, buggies and gokarts. [More Info]
10A8280
$39.99
10A4251
$89.99
30A1242
$179.99
Starter. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A5062
$49.99
This CDI applies to (and is not limited to) Honda XR 600R dirt bikes as well as other interchangeable models and clones. [More Info]
60A9910
$9.99
Water resistant inline fuse holder for mini fuses (APM/ATM) up to 35A. Wire lead is rated for 12Awg 600 volt. DC32Volt [More Info]
10A5012
$49.99
This CDI applies to (and is not limited to) Yamaha TTR50 dirt bikes as well as other interchangeable models and clones. [More Info]
60A9440
$19.99
Circuit Breaker - 40A, FULL [More Info]
Circuit Breaker - Push Button, 35A, HT-01C, 125/250VAC, 32/50VDC [More Info]
Ignition coil. Commonly used for (but not limited to) 400cc, 500cc, 700cc, 800cc and 1000cc engines, such as the Hisun 400cc, 500cc, 700cc, 800cc and Odes 800cc, 1000cc ATVs and UTVs, as well as many other clones, rebrands and similar displacement [More Info]
10A9741
$44.99
Negative battery cable. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
Starter Relay / Starter Solenoid. Commonly used for (but not limited to) 400cc, 500cc and 700cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc 4x4 ATVs and UTVs, as well as many other clones, rebrands and similar displacement [More Info]
This Universal Wiring Harness is widely considered the most popular profile for 50cc, 70cc, 90cc, 110cc and 125cc ATVs, dune buggies and go karts. [More Info]
This rectifier / voltage regulator applies to (and is not limited to) CFMoto CF125, CF150, and Honda CH125 models. [More Info]
Genuine CF Moto Key Switch / Ignition Switch, includes ignition module, key and lock. Ignition key switch assembly is typically found in the Ignition and Lock Kit sections of CF Moto part manuals. [More Info]
1T5 bus cable, 1200mm base cable with 4 way split. Total length from split is 100mm for display, 120mm for front brakes, 120mm for rear brakes, and 250mm for throttle. [More Info]
10A2510
$29.99
Starter Relay/Starter Solenoid 50cc, 70cc, 90cc 110cc, 125cc, 150cc, 200cc, 250cc, 260cc, 300cc, 2 pin connector(white) and a 25.5cm wire length. [More Info]
10A2030
$29.99
Ignition coil most commonly (though not exclusively) used for 125cc to 150cc GY6, 200cc and 250cc engines with opposing prong contacts. This is the second of two very common ignition coil designs used for this displacement range. [More Info]
This 5-wire, 8-coil magneto coil (stator) is typically found in the Magneto Comp section of several part manuals. Commonly used for but not limited to 156FMI, 157FMI, 162FMJ, 125cc, 150cc, 200cc, and 250cc vertical engines. [More Info]
10A5200
$34.99
This CG125 CDI module is typically found in the CDI Unit section of several part manuals. Commonly used for but not limited to 125cc engines. [More Info]
10A6135
$84.99
Rectifier - Voltage Regulator fits many 150cc to 400cc machines. Part number: 5.3.01.0081. Parts for model D300. Most commonly (though not limited to) Buyang 300cc 4x4 ATV, Gio Bear 300cc, Daymak Grunt 300cc, Midwest 300cc, ZMC Titan 300cc, [More Info]
30A1150
$69.99
Yamaha ATV Starter Motor, YMH250. YFM35R/35X/350ER/FW. Counter clockwise rotation with 9 splines.
[More Info]
10A2021
$39.99
Ignition coil 50cc to 250cc, 2 prong connectors (18mm apart), 50cm wire length 55cm total length. PERFORMANCE PRO 2 EDITION, red colour. Individually packaged with hanger hook. [More Info]
10A9210
$79.99
This DC electric motor (brush / brushed type) is rated for 24VDC input, 13.7A and 250W output with a rated speed of 2650RPM. In the transportation and mobility industries this motor is most commonly used on electric scooters, mobility scooters, [More Info]
10A1900
$79.99
This high voltage / tension / ignition cable, which corresponds to the high voltage coil transducer 10A2001, is typically found in the EFI Systems / Electrical [More Info]
This ECU controller is typically found in the Electric System / EFI Systems / Electric Assy / Seat Assy / Denso Assembly KL500-B-170000 KL600-B-170000 section of several part manuals. [More Info]
10A4400
$39.99
Ignition Control Unit - Yamaha PW50. PW50T-F26-03 [More Info]
30A9387
$109.99
Stator / Magneto Coil - 18G. This coil works on (but not limited to) the 250cc ATV's. Stator has one 2 wire male plug and one 3 wire female plug. [More Info]
10A4241
$29.99
This plastic ignition key switch features a 4 wire with two male connectors (white) and includes 2 keys. Commonly (though not exclusively) used for 50cc to 250cc ATVs, dirt bikes, scooters, buggies, carts as well as other powersports and personal [More Info]
10C5650
$109.99
This is a 48V, 25A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
10A7380
$299.99
This instrument cluster / instrument panel is commonly used for a wide range of UTVs. Most popularly applies to the Odes and Kangdi (Kandi) 800cc UTVs. [More Info]
Kill cord with safety tether commonly used for kids atv's, dirt bikes and other kids powersports toys. Safety tether has an additional push button kill switch. [More Info]
10A6180
$399.99
This rectifier / voltage regulator is commonly used for a wide range of ATVs and UTVs. Most popularly applies to the Odes and Kangdi (Kandi) 800cc UTVs. [More Info]
10A8720
$15.99
This horn switch is commonly used for a wide range of powersport and mobility machines including ATVs, dirt bikes, scooters, buggies and gokarts. [More Info]
Stator / Magneto coil, 18G, 5 Wire. Commonly used for (but not limited to) 400cc, 500cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc and Hisun 800cc UTVs as well as many other clones, rebrands and similar displacement [More Info]
10A8180
$74.99
Left switch assembly. Commonly used for (but not limited to) 500cc, 700cc and 800cc engines, such as the Hisun 500cc, Hisun 700cc and Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
30A1252
$179.99
Starter. Commonly used for (but not limited to) 400cc and 500cc engines, such as the Hisun 400cc and Hisun 500cc 4x4 ATVs and Hisun 400cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A9052
$24.99
This charger plug applies to a wide variety of electric scooters and other machines. Three prong charger receptacle. Total wire length including plug is 80cm. [More Info]
10A6852
$279.99
60A9920
$9.99
Water resistant inline fuse holder for ATO fuses up to 35A. Wire lead is rated for 16Awg 600 volt. DC32Volt [More Info]
30A9035
$64.99
Stator - Magneto Coil, 5AX100, 2 Wire [More Info]
60A9463
$19.99
Circuit Breaker - 63A, FULL [More Info]
Circuit Breaker - Push Button, 40A, HT-01C, 125/250VAC, 32/50VDC [More Info]
10A4680
$349.99
Power steering controller. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A4340
$49.99
Water temperature sensor. Commonly used for (but not limited to) 400cc, 500cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc and Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
This starter relay / starter solenoid is used for a wide displacement range of ATVs and UTVs. Most popularly applies to 400cc ATVs and UTVs from companies like Odes and Liangzi. [More Info]
70C3201
$49.99
Hand throttle, twist grip throttle assembly set (left and right, 2pcs total). Commonly used for electric scooters of all sizes and power ranges including (but not limited to) 350W, 500W, 800W and 1000W with 24V, 36V, 48V, 60V, 72V, 84V and [More Info]
30A9337
$59.99
Magneto Coil (Stator) for 50cc GY6 style 4-stroke engines. 8 Pole, 2 wire for standard DC fired ignition systems. [More Info]
Stator / Magneto coil assembly. 15 coil, 3 wire. Commonly used for (but not limited to) Honda CBR600 and CBR600RR models, years 2007-2012, as many other clones, rebrands and similar displacement machines. [More Info]
70S9388
$249.99
Electric motor, 48V, 500W. Direct replacement for SHOK Scooters Triode fat tire trike (3-wheel) electric bike (e-bike) front 24x4.0 wheel as well as many other brands and models in the open market. [More Info]
Controller / control unit, 36V. Direct replacement brushless hub motor controller for SHOK Motors SX16 youth 16 inch balance bikes as well as many other brands and models in the open market. [More Info]
This Rectifier (Voltage Regulator) applies to (and is not limited to) 150cc standard, 150cc GY6 engines, 200cc and 250cc engines. It is most commonly used for 150cc scooters and automatic ATVs, 200cc and 250cc ATVs. [More Info]
10A5550
$39.99
This performance CDI applies to (and is not limited to) 50cc 70cc 90cc 100 and 125cc engines. Most commonly used for 50cc to 125cc automatic ATVs, dirt bikes and go-karts/buggies. [More Info]
30A9055
$89.99
Performance Racing Stator (Magneto Coil) with Rotor for 50cc to 150cc engines. Fits many GY6 profile engines from the 50cc to 250cc range. Most commonly used with 150cc GY6 engines. [More Info]
10A5100
$39.99
Common motorcycle CDI works for many models of dirt bikes and motorcycles including the Yamaha JOG 90cc.
Case dimensions are 3.6cm x 4.1cm x 3. [More Info]
60A9010
$8.99
Glass Fuse - 10A. 10 pieces. [More Info]
30A1160
$69.99
ATV/Scooter Starter Motor, XV-250. Counter clockwise rotation with 9 splines.
[More Info]
10A2022
$39.99
Ignition coil 50cc to 250cc, 2 prong connectors (18mm apart), 50cm wire length 55cm total length. [More Info]
10A9200
$59.99
This DC electric motor (brush / brushed type) is rated for 24VDC input, 8.4A and 150W output with a rated speed of 2500RPM. In the transportation and mobility industries this motor is most commonly used on electric scooters, mobility scooters, [More Info]
30A1320
$299.99
Starter (aka starter motor). Most commonly used for (but not limited to) 400cc ATVs such as the Jianshe JS400 Mountain Lion as well as many other clones, rebrands and similar displacement machines. [More Info]
10A2001
$159.99
This high voltage / ignition coil is typically found in the EFI Systems / Electrical System (EFI) / Seat Assy section of several part manuals. [More Info]
30A9386
$109.99
Stator / Magneto Coil - CG18, CG125-18. This coil works on (but not limited to) the 300cc ATV's. Approximate dimensions:
[More Info]
30A1350
$209.99
This genuine CF Moto Starter Motor is typically found in the Starting Motor / Electric Starting section of several part manuals. Commonly used for but not limited to CF188 / 500cc engines. [More Info]
30A9388
$109.99
10A4274
$44.99
10C5651
$119.99
This is a 48V, 25A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
10A7280
$99.99
This switch panel / instrument switch assembly consists of the headlights, turning signals, horn and electric dump box switches. Commonly used for a wide range of UTVs. [More Info]
10A8050
$34.99
Kill switch with safety tether commonly used for kids atv's, dirt bikes and other kids powersports toys. Universally mountable and most popularly installed on the handle bars. [More Info]
High voltage ignition coil. Commonly used for (but not limited to) 400cc, 500cc, 700cc, 800cc and 1000cc EFI engines, such as the Hisun 400cc, 500cc, 700cc and 800cc UTVs, Odes 800cc and 1000cc UTVs, as well as many other clones, rebrands and [More Info]
10A8402
$15.99
This headlight switch is commonly used for a wide range of powersport and mobility machines including ATVs, dirt bikes, scooters, buggies and gokarts. [More Info]
10A2640
$9.99
Relay boot. Commonly used for (but not limited to) 400cc, 500cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc and Hisun 800cc UTVs as well as many other clones, rebrands and similar displacement machines. [More Info]
10A7341
$109.99
Instrument cluster / instrument panel. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
30A4650
$49.99
Fuel sensor (fuel "float"). Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A7330
$239.99
Instrument cluster / instrument panel / speedometer.
Most commonly used for (but not limited to) 260cc and 300cc liquid cooled ATV's, UTVs, dirt bikes / pit bikes, scooters, dune buggies, go karts and other similar products. [More Info]
30A9540
$119.99
Magneto cylinder (stator housing). Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
30A6080
$499.99
Electrical power steering. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
60A9922
$9.99
Water resistant inline fuse holder for ATO fuses up to 40A. Wire lead is rated for 16Awg 600 volt. DC32Volt [More Info]
10A2015
$34.99
This Ignition Coil applies to (and is not limited to) Suzuki LT80 ATVs as well as other interchangeable models and clones.
[More Info]
60A9508
$11.99
Circuit Breaker - Push Button, 8A, ST-1, 125/250VAC, 32VDC [More Info]
Circuit Breaker - Push Button, 45A, HT-01C, 125/250VAC, 32/50VDC [More Info]
10A6640
$149.99
20A7440
$69.99
Water temperature sensor. Commonly used for (but not limited to) 400cc, 500cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc and Hisun 800cc 4x4 ATVs and Hisun 400cc UTVs, as well as many other clones, rebrands and [More Info]
10A4575
$449.99
This ECU controller assembly for Hisun 700cc UTV with EFI engine is used for a wide displacement range of ATVs and UTVs. [More Info]
10C5621
$89.99
This is a 36V, 24A, brushless controller. Voltage: 24V, Electric Current: 24A, Off Voltage: 31.5±1V. Case dimensions are 9.3cm x 6.4cm x 3cm (LxWxH). [More Info]
Starter Relay - Starter Solenoid, Fuse Based with 2 Fuses. A direct replacement for machines such as the Yamaha YFM250, YFM300, YFM350, YFM400, YFM450 and YFM660 [More Info]
30A9402
$199.99
Stator / Magneto coil assembly. 18 coil, 3 wire. Commonly used for (but not limited to) Honda CBR1000 and CBR1000RR models, years 2004-2007, as many other clones, rebrands and similar displacement machines. [More Info]
Electric motor & wheel assembly. 24x4.0 profile. 48V, 500W fat motor. Includes mounted motor, rim, rim tape, tube and tire. Direct front wheel replacement for SHOK Scooters Triode fat tire trike (3-wheel) electric bike (e-bike) as well as many [More Info]
Controller / control unit, 36V. Direct replacement brushless hub motor controller for SHOK Motors SX20 youth 16" (16 inch) balance bikes as well as many other brands and models in the open market. [More Info]
30A1520
$54.99
This top mount / upper mount starter applies to (and is not limited to) 50cc - 150cc engines. Most commonly used for automatic and semi-auto 50cc, 70cc, 90cc, 110cc and 125cc ATV engines. [More Info]
10A5560
$39.99
This performance CDI applies to (and is not limited to) 125cc 150cc 200cc and 250cc engines. Most commonly used for 150 to 250cc ATVs, dirt bikes, scooter and go-karts/buggies. [More Info]
10A6035
$34.99
This rectifier (voltage regulator) is 5 a pin female configuration and is most commonly used for (but not limited to) 50cc to 250cc ATVs. Total case dimensions are 6. [More Info]
10A6034
$34.99
This rectifier (voltage regulator) is 4 a pin female configuration and is most commonly used for (but not limited to) 50cc to 250cc ATVs. Total case dimensions are 6. [More Info]
30A1000
$149.99
This starter motor assembly is typically found in the Starting Motor / Starter section of several part manuals. Commonly used for but not limited to 4-stroke liquid cooled RS19589 / 260cc, 300cc, and 325cc engines. [More Info]
30A1170
$69.99
SUZUKI Starter Motor, AN250. SUZUKI GSF600S/GSX750F/GSX600F. Clockwise rotation with 9 splines.
[More Info]
80A8244
$27.99
This 3-wire (2-pin plug) cable is used in conjunction with an electric choke carburetor and serves as the control wire for engaging/disengaging the electrical choke. [More Info]
10A9220
$99.99
This DC electric motor is rated for 24VDC input, 19.2A and 350W output with a rated speed of 2750RPM. In the powersports industry this electric motor is most commonly used on children's electric ATVs, electric dirt bikes, electric go karts [More Info]
10A2910
$9.99
Ignition Coil Boot - 50cc to 250cc [More Info]
10A7200
$299.99
Switch Panel - Combined Switch Assembly, XY500UE, XY600UE,
UTV. This switch panel - combined switch assembly is most commonly used for (but not limited to) Chironex Spartan 500cc and 600cc UTVs (4x4/2x4 and similar variations), Xinyang 500cc [More Info]
30A9312
$64.99
Stator / Magneto Coil, GY6-6. Plug is a 4 pin 3 wire male plug, 2 wires with bullet connectors. Approximate dimensions:
[More Info]
10A4238
$79.99
Key switch with lock assembly, CFMoto genuine parts.
Part No. 9010-010000, Old Part No. 901-01.00.00
[More Info]
Combination meter, digital instrument cluster. 3 bolt mount. Similar and often interchangeable with part number 10A7300. This instrument cluster is most commonly (but not exclusively) used for 400cc ATVs like the Odes 400cc 4x4 ATV and the [More Info]
This metal ignition key switch features a 6 pin male connector (white) and includes 2 keys. Commonly (though not exclusively) used for 50cc and 90cc GY6 configuration scooters. [More Info]
10C5618
$89.99
This is a 36V, 17A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
10A1180
$39.99
10C5664
$109.99
This is a 48V, 35A controller. These types of controllers are commonly (though not exclusively) used for electric bicycles.
[More Info]
30A9384
$149.99
This stator is commonly used for a wide range of ATVs and UTVs. Most popularly applies to the Odes and Kangdi (Kandi) 800cc UTVs.
[More Info]
10A8302
$15.99
This power switch switch is commonly used for a wide range of powersport and mobility machines including ATVs, dirt bikes, scooters, buggies and gokarts. [More Info]
10A2055
$37.99
This assembly consisting of ignition coil (a.k.a solid state module), spark plug cap or boot (a.k.a noise suppressor) and stop switch cord (a. [More Info]
10A7350
$249.99
Instrument cluster / instrument panel. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
30A1740
$199.99
This shift control motor is used for a wide displacement range of ATVs and UTVs. Most popularly applies to 400cc ATVs and UTVs from companies like Odes and Liangzi. [More Info]
10A8131
$59.99
*Note* in 2019 the primary production factory for this part began to produce a slightly different variation that still works with older models. [More Info]
30A9550
$189.99
Magneto cylinder (stator housing). Commonly used for (but not limited to) 400cc, 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs and Hisun 400cc UTVs, as well as many other clones, rebrands and similar displacement [More Info]
10A2032
$69.99
Ignition coil. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the world. [More Info]
60A9950
$34.99
Water resistant inline fuse holder for maxi fuses (APX) up to 100A. Wire lead is rated for 10Awg 600 volt. DC32Volt. [More Info]
60A9200
$8.99
Black 1 amp 32 volt regular blade fuse (ATO) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J1284, JASO D612, ISO 8820-3 and QC/T 420. [More Info]
10C9300
$59.99
Motor Controller Tester - Ebike Testing Device [More Info]
60A9505
$11.99
Circuit Breaker - Push Button, 5A, ST-1, 125/250VAC, 32VDC [More Info]
10A6580
$74.99
Light switch assembly. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A7450
$79.99
Water temperature sensor. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
This ignition coil is a direct replacement for the Honda brand and Honda clone 8hp (GX240), 9hp (GX270), 11hp (GX340), 13hp (GX390) and all similarly designed motors in that range. [More Info]
10C5635
$89.99
This is a 36/48V, 25A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
This rectifier (aka voltage regulator) applies to (and is not limited to) Yamaha TTR50/90/125/230, SH50, and RT180 models. [More Info]
This Ignition Key Switch (Keyswitch) applies to (and is not limited to) Suzuki LTZ50 Quadsport, LT80 Quadsport, LT-4WD Quadrunner, LTF250 / 250F Quadrunner, LTF 300F King Quad, and LTF4 King Quad models. [More Info]
30A9404
$249.99
Stator / Magneto coil assembly. 11 coil, 3 wire. Commonly used for (but not limited to) Yamaha YZF1000, YZFR1 and YZF 1000 R1 for years 2004-2008, YZF-R1R RaceBase [More Info]
Electric motor & wheel assembly. 20x4.0 profile. 48V, 500W fat motor with 175mm drop out. Includes mounted motor, rim, rim tape, tube and tire. [More Info]
72K2535
$79.99
Controller / control kit, 36V. Direct replacement for SHOK Motors Circuit Board series SKX250 electric single motor 250W skateboard (e-skateboard) as well as many other brands and models of electric skateboards and electric longboards in the [More Info]
30A1510
$54.99
This bottom mount / lower mount starter applies to (and is not limited to) 50cc - 125cc engines. Most commonly used for automatic and semi-auto 90cc and 110cc ATV engines. [More Info]
10A4220
$29.99
This plastic ignition key switch features a 2 pin male connector (white) and includes 2 keys. Fits many 50cc to 250cc ATVs, Dirt Bikes, Scooters, and more. [More Info]
10A4242
$29.99
This plastic ignition key switch features a 4 pin male connector (white) and includes 2 keys. Fits many 50cc to 250cc ATVs, Dirt Bikes, Scooters, and more. [More Info]
This CDI (7500 RPM) is typically found in the Electrical System section of several part manuals. Commonly used for but not limited to LH170MM / LH173MN / VM170MM / VM173MN / SOHC / 250cc, 260cc, and 300cc engines. [More Info]
10A6040
$39.99
This rectifier (voltage regulator) is 4 a pin female configuration with an inline capacitor and is most commonly used for (but not limited to) 50cc to 250cc Dirt Bikes. [More Info]
30A1250
$54.99
This performance starter fits all 50cc GY6 style engines and clones. Mounting hole distance of approximately 7cm from center hole to center hole. [More Info]
30A1190
$84.99
ATV/Scooter Starter Motor, TB50. NH80 Aero. OEM PART #31200-GC8-014. Clockwise rotation with 14 splines.
[More Info]
30A1600
$16.99
This starter cable applies to (and is not limited to) top mount and bottom mount starters for 50cc 70cc 90cc 110cc and 125cc engines. Most commonly used for top and bottom mount starters of 90cc and 110cc automatic ATV engines. [More Info]
This Magneto Cylinder applies to (and is not limited to) 50cc 70cc 90cc 110cc and 125cc electric start automatic engines. Most commonly used for 125cc electric start ATVs, dirt bikes and buggies/go-karts. [More Info]
10A9230
$119.99
This DC electric motor (brush / brushed type) is rated for 36VDC input, 18.3A and 500W output with a rated speed of 2500RPM. In the transportation and mobility industries this motor is most commonly used on electric scooters, mobility scooters, [More Info]
10A8120
$39.99
This switch applies to (but is not limited to) 50cc to 250cc ATVs as well as various models of electric and gas scooters. The total wire length is 62cm. [More Info]
10A7500
$249.99
Transducer - Air Pressure, XY500UE, XY600UE, UTV. Also commonly referred to as "Air Pressure Sensor". This air pressure transducer is most commonly used for (but [More Info]
10A2029
$59.99
This 2-pronged ignition coil is typically found in the Electric System (Cab.) section of several part manuals. Commonly used for but not limited to CF188 / 500cc engines. [More Info]
10A8817
$25.99
Rear brake cable switch used to activate brake lights. This brake light switch is most commonly (but not exclusively) used for 400cc ATVs and UTVs from companies like Odes and Liangzi. [More Info]
This metal ignition key switch features a 6 pin male connector (white) and includes 2 keys. Commonly (though not exclusively) used for 125cc and 150cc GY6 configuration scooters. [More Info]
10C5627
$119.99
This is a 36V, 25A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, Electric scooters and electric mobility scooters with hall configuration. [More Info]
10A2580
$99.99
***Note - this starter relay has been replaced at the factory by an updated model, current pictures are not yet updated. Factory maintained the same part number but new version will only work for new machines starting in 2017. [More Info]
ECU Relay for 500cc, 550cc EFI (Electronic Fuel Injected) ATVs. Most commonly used for (but not limited to) Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV as well as many other clones, rebrands and similar [More Info]
30A9580
$139.99
This magneto cylinder / stator housing is commonly used for a wide range of ATVs and UTVs. Most popularly applies to the Odes and Kangdi (Kandi) 800cc UTVs. [More Info]
10A7397
$139.99
Multi-Feature Digital Display most commonly (though not exclusively) used for a wide variety of 36V electrical bicycles (e-bikes). [More Info]
30A9801
$69.99
Magneto Cylinder (aka stator housing, stator cylinder, magneto housing) - Yamaha PW80. G80-F09-A. This magneto cylinder is most commonly (though not exclusively) used for Yamaha Peewee 80 aka Yamaha PW80. [More Info]
10A6280
$49.99
Horn. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A2511
$29.99
This Starter Relay / Starter Solenoid commonly applies to (and is not limited to) 50cc 70cc 90cc 110cc 125cc 150cc 200cc 250cc up to 500cc electric start engines. [More Info]
10A8155
$64.99
Left switch assembly. Most commonly used for (but not limited to) 500cc and 550cc EFI engines such as the Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV, Feishen 550cc ATV as well as many other clones, rebrands [More Info]
10A4280
$79.99
Ignition Switch / Ignition Key Switch. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A8812
$59.99
Brake light switch. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the world. [More Info]
60A9318
$10.99
Red 10 amp 32 volt mini blade fuse (APM / ATM) constructed with PE66 and silver plated zinc alloy terminals. 10 pieces. Complies with SAE J2077 and ISO 8820-3. [More Info]
This temperature sensor (aka thermoswitch) is commonly used for but not limited to 125cc, 150cc, 250cc, 400cc, 500cc, 520cc, 600cc, 625cc, and 800cc engines. [More Info]
10A9701
$27.99
Battery / Battery Box cable most commonly (though not exclusively) used for electric scooters and electric bicycles (ebikes). [More Info]
60A9507
$11.99
Circuit Breaker - Push Button, 7A, ST-1, 125/250VAC, 32VDC [More Info]
10A6480
$59.99
Electromagnetic valve controller. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
20A7451
$74.99
Water temperature sensor. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A2031
$29.99
Ignition Coil for (but not limited to) 150cc to 400cc machines. Fits many CF Moto machines, and others. Note that this spark plug wire has a 90 degree cap. [More Info]
10C7240
$159.99
This is a 72V, 18T, 40A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
This Universal Wiring Harness is widely considered the most popular profile for 150cc, 200cc and 250cc ATVs, dune buggies and go karts. [More Info]
30A9045
$49.99
Stator / Magneto Coil - GY650-8, 3-wire. Used on a wide variety of machines, statistically most commonly found on GY6 profile 50cc scooters and go-karts/buggies. [More Info]
30A9406
$219.99
Stator / Magneto coil assembly. 18 coil, 5 wire, 2 plug (3 pin and 2 pin). Commonly used for (but not limited to) Suzuki LTR 450 & 450Z QuadRacer models for years [More Info]
Electric motor & wheel assembly. 26x4.0 profile. 48V, 500W fat motor with 190mm drop out. Includes mounted motor, rim, rim tape, tube and tire. [More Info]
Electric motor, 36V, 250W, 75mm (2.95 inch) diameter and 52mm (2.05 inch) width. Direct replacement for SHOK Motors Circuit Board series SKX250 electric single motor 250W skateboard (e-skateboard) as well as many other brands and models of skateboards, [More Info]
This 24mm/38mm electric choke carburetor (2 pin plug) is typically found in the Carburetor Assy / Carburetor section of many different part manuals. [More Info]
10A4240
$29.99
This plastic ignition key switch features a 4 pin female connector (white) and includes 2 keys. Fits many 50cc to 250cc ATVs, Dirt Bikes, Scooters, and more. [More Info]
30A9335
$64.99
Stator / Magneto Coil - GY6-8, 5-wire. Approximate dimensions:
[More Info]
This ignition coil and wire is typically found in the Electrical System section of several part manuals. Commonly used for but not limited to 260cc, 300cc, 325cc, and 330cc engines. [More Info]
10A7550
$54.99
This transducer – air temperature sensor is typically found in the EFI Systems / Air Filter Assy / Fuel Injection System / Denso Assembly KL500-B-170000 KL600-B-170000 [More Info]
30A1260
$59.99
This starter is commonly (but not exclusively) used for 125cc & 150cc GY6 style engines and clones. Mounting hole distance of approximately 7. [More Info]
30A1200
$69.99
This starter motor unit with 9 splines / teeth is typically found in the Starter Motor section of several part manuals. Commonly used for but not limited to 152MI / 157MJ / 158MJ, 125cc, 150cc, and 200cc engines with VIN numbers JH2KF010-FK000019 [More Info]
10A8200
$42.99
Motion activated 36V-72V remote alarm with a 125dB siren. [More Info]
10A5310
$199.99
CDI (in this case sometimes also referred to as ECU). Most commonly used for (but not limited to) 400cc ATVs such as the Jianshe JS400 Mountain Lion as well as many other clones, rebrands and similar displacement machines. [More Info]
10A9240
$129.99
This DC electric motor (brush / brushed type) is rated for 36VDC input, 29.2A and 800W output with a rated speed of 2750RPM. In the transportation and mobility industries this motor is most commonly used on electric scooters, mobility scooters, [More Info]
10A2035
$79.99
Ignition coil - 400cc Range. 2 prong connectors (2.2cm apart), 60cm wire length, 74cm total length. Coil applies to many 150cc - 500cc machines, applicable to ATVs, Dirt Bikes, buggies etc. [More Info]
10A7900
$29.99
Cigarette Lighter - 12V, single lead wire. This cigarette lighter profile is commonly applicable for many big brand and lesser brand name machines from all over the world. [More Info]
10A5598
$129.99
This genuine CF Moto CDI unit is commonly used for but not limited to 500cc engines. It is most popularly known for its use in CF Moto CF500 (500cc) as well as many other brands of ATVs, UTVs (side-by-side), dirt bikes, scooters, go karts (buggies) [More Info]
10A8132
$139.99
This handle bar mounted switch is often referred to as "instrument switch", "light switch" "starter switch" and many other names. Most commonly (but not exclusively) used for 400cc ATVs from companies like Odes and Liangzi. [More Info]
This metal ignition key switch features a 4 pin male connector (white) and includes 2 keys. Commonly (though not exclusively) used for 125cc and 150cc GY6 configuration scooters. [More Info]
10C5612
$89.99
This is a 24V, 15A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters with hall configuration. [More Info]
Starter commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. [More Info]
10A6854
$249.99
Cable Assembly for 500cc, 550cc EFI (Electronic Fuel Injected) ATVs. Most commonly used for (but not limited to) Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV as well as many other clones, rebrands and similar [More Info]
Spark plug cable set, total 4 cables. Commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. [More Info]
Starter relay / Starter solenoid. Most commonly used for (but not limited to) 260cc and 300cc liquid cooled ATV's, UTVs, dirt bikes / pit bikes, scooters, dune buggies, go karts and other similar products. [More Info]
10A5040
$139.99
CDI. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A2027
$29.99
Ignition coil, Yamaha profile. Most commonly (and not exclusively) used for 50cc, 70cc, 90cc 110cc, 125cc, 140cc, 150cc, 155cc, 160cc, 200cc, 250cc and 300cc engine displacements. [More Info]
10A2184
$39.99
Ignition coil cable / spark plug cable. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A6027
$69.99
Rectifier - Voltage Regulator. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all over the world. [More Info]
60A9210
$8.99
Red 10 amp 32 volt regular blade fuse (ATO) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J1284, JASO D612, ISO 8820-3 and QC/T 420. [More Info]
10A6192
$41.99
DC converter.
[More Info]
10A4302
$9.99
Key blanks / blank keys - 2pcs [More Info]
60A9510
$11.99
Circuit Breaker - Push Button, 10A, ST-1, 125/250VAC, 32VDC [More Info]
10A6380
$64.99
Fan controller. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs and Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
30A1262
$184.99
Starter. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A1176
$29.99
This JD1912 relay has a max rated current of 40A.
[More Info]
10C6035
$139.99
This is a 60V, 15T, 35A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
10A6026
$49.99
This rectifier / voltage regulator applies to (and is not limited to) Yamaha TTR250 and XT250 models. [More Info]
Charger cable / charger plug, 110V. Direct replacement for SHOK Scooters Neutron, Proton and Graviton kick scooters as well as many other brands and models such as Segway Ninebot Max G30 / G30LP and Xiaomi. [More Info]
30A9408
$149.99
Stator / Magneto coil assembly. 18 coil, 3 wire, single 3 pin plug. Commonly used for (but not limited to) KTM 125 to 200 DUKE models for years 2011-2019, as many other clones, rebrands and similar displacement machines. [More Info]
72K5015
$139.99
Electric motor, 36V, 500W, 83mm (3.27 inch) diameter. Direct replacement for SHOK Motors Circuit Board Ultra series SKX500 electric dual motor 500W longboard (e-longboard) as well as many other brands and models of electric skateboards and electric [More Info]
10U5010
$179.99
Performance CDI Yamaha Rhino 660, 450 and Grizzly 660 models. Also a stock upgrade for the Baja Wilderness 400cc and Hsun 400cc 4x4 ATVs. This CDI unit with wire switch lead allows the rider to enable the Factory Standard rev limiter (RPM restriction) [More Info]
10A4261
$37.99
This metal ignition key switch features a 6 pin (9 slot) female connector (white) and includes 2 keys. Applies to many 50cc - 250cc ATVs, Dirt Bikes, Scooters, as well as other powersports and personal transportation products. [More Info]
10A7394
$79.99
Multi-Feature Display most commonly (though not exclusively) used for a wide variety of 48V electrical bicycles (e-bikes). Considered one of the most common profiles. [More Info]
10A4200
$69.99
This ignition switch that comes with 2 keys and 1 lock (LCK1200) is typically found in the Handlebars/ Handlebar (EEC) / Handlebar (EPA) section of several part [More Info]
10A8400
$15.99
E Bike and Electric Scooter Switch - Headlight On/Off. Applies to common scooter brands such as headlight switch for Gio 500W and 800W scooters, Tao Tao scooters and many others. [More Info]
30A1050
$69.99
Arctic Cat ATV/Kymco Starter Motor, GY6-50/80. DVX/Youth 50/90. Counter clockwise rotation with 10 splines.
[More Info]
30A1210
$54.99
Starter motor commonly (though not exclusively) used for 125cc and 150cc ATVs, scooters and other motorized products. Popularly used for Eton 125cc and 150cc ATVs. [More Info]
10A5590
$59.99
CDI. Casing at widest dimensions are L-7cm, W-4.9cm and H-2.8 CDI has one female 4 wire plug and one 3 wire female plug. This is a very common profile and is used for (but not limited to) many big brand and lesser brand name machines from all [More Info]
30A1010
$59.99
This scooter starter motor with 11 splines / teeth is typically found in the Starter Motor section of several part manuals. Commonly used for but not limited [More Info]
10A9250
$139.99
This DC electric motor (brush / brushed type) is rated for 36VDC input, 35.6A and 1000W output with a rated speed of 3000RPM. In the transportation and mobility industries this motor is most commonly used on electric scooters, mobility scooters, [More Info]
Ignition Switch / Ignition Key Switch - 400cc Range with Steering Lock. Includes 2 keys. Switch applies to many 150cc to 500cc machines, applicable to ATVs, Dirt Bikes, buggies etc. [More Info]
10A8825
$44.99
Brake Light Switch - Brake Pedal. This brake light switch is most commonly used for (but not limited to) Chironex Spartan 500cc and 600cc UTVs (4x4/2x4 and similar variations), Xinyang 500cc - 600cc ATVs and UTVs (4x4/2x4 and similar variations).
Common [More Info]
10A8135
$109.99
This genuine CF Moto left handlebar switch (aka main function switch) is typically found in the Handlebar section of several part manuals. [More Info]
10C5615
$79.99
This is a 24V, 20A, brush / brushed controller. Voltage: 24V, Power: 350W, Electric Current 20A. Case dimensions are 9.3cm x 6.5cm x 3.1cm (LxWxH). [More Info]
10A7840
$349.99
Generator - Reducer - Actuator 2WD-4WD. Most commonly (but not exclusively) used for 400cc ATVs and UTVs from companies like Odes and Liangzi. [More Info]
This metal ignition key switch features a 6 pin male connector (white) and includes 2 keys. Commonly (though not exclusively) used for 150cc, 250cc and 250cc GY6 configuration scooters. [More Info]
10C5619
$89.99
This is a 36V, 17A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
10A4590
$1,299.99
ECU commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. [More Info]
Meter display / speedometer for 500cc, 550cc EFI (Electronic Fuel Injected) ATVs. Most commonly used for (but not limited to) Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV as well as many other clones, rebrands [More Info]
10A2191
$14.99
Ignition coil clip commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. [More Info]
10A2630
$9.99
Relay boot. Commonly fits many 250cc to 800cc machines. Manufacturer part number 5.3.01.1020. Applies primarily to (but not limited to) Buyang 300cc 4x4 ATV (including sub models FA-H300 and FA-D300), Gio Bear 300cc, Daymak Grunt 300cc, Midwest [More Info]
10A5052
$199.99
CDI. Commonly used for (but not limited to) 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A6015
$39.99
This Rectifier (Voltage Regulator) applies to (and is not limited to) Yamaha TTR125 dirt bikes as well as other interchangeable models and clones. [More Info]
30A9382
$169.99
Stator / Magneto coil, 18G, 5 Wire. Commonly used for (but not limited to) 400cc, 500cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc and Hisun 800cc UTVs as well as many other clones, rebrands and similar displacement [More Info]
10A2042
$84.99
Ignition coil most commonly (though not exclusively) used for 250cc to 400cc engines with opposing prong contacts. This is the second of two very common ignition coil designs used for this displacement range. [More Info]
60A9206
$8.99
Tan 5 amp 32 volt regular blade fuse (ATO) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J1284, JASO D612, ISO 8820-3 and QC/T 420. [More Info]
10A6190
$39.99
DC converter.
[More Info]
10A4300
$9.99
Key blanks / blank keys - 2pcs. Commonly (though not exclusively) used for scooters, GY6 and other formats. [More Info]
60A9515
$11.99
Circuit Breaker - Push Button, 15A, ST-1, 125/250VAC, 32VDC [More Info]
10A6881
$269.99
EFI cable assembly. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
30A9570
$349.99
Magneto cylinder aka generator rotor assembly (flywheel). Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A2033
$29.99
Ignition coil. For the 2 wire (no plug) version of this product please see our part number 10A2025 and for the single male (2 wire) plug version see our part number 10A2026. [More Info]
10C6040
$149.99
This is a 60V, 18T, 40A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
10A2034
$29.99
Ignition coil. Most commonly (and not exclusively) used for 50cc, 70cc, 90cc 110cc, 125cc, 140cc, 150cc, 155cc engine displacements. This has a 2 wire, 2 plug connector. [More Info]
10S2415
$89.99
Electric Motor 24V, 150W. Direct replacement for SHOK Scooters Electron kick scooter as well as many other brands and models. [More Info]
10S3118P
$69.99
Controller 31V, 17A. Direct replacement for SHOK Scooters Proton kick scooter (Years 2023+) as well as many other brands and models such as Segway Ninebot and Xiaomi. [More Info]
Stator / Magneto coil assembly. 7 coil, 6 wire, 3 single plug (4-pin and 2 single pins). Commonly used for (but not limited to) a wide range of models including [More Info]
72K5035
$149.99
Controller / control kit, 36V. Direct replacement for SHOK Motors Circuit Board Ultra series SKX500 electric dual motor 500W longboard (e-longboard) as well as many other brands and models of electric skateboards and electric longboards in the [More Info]
Starter 200cc, 250cc and some 400cc engines. Applies to almost all 200cc to 250cc Chinese engines with 9 Teeth (alternative is 11 teeth) and is most recently famous for its use on Baja Wilderness 4x4 ATVs - 400cc, variation 1. [More Info]
10D8000
$24.99
This kill switch applies to (but is not limited to) 50cc to 250cc dirt bikes. This kill switch also contains an electric start feature, making this module one of the most commonly used for the 50cc, 70cc, 90cc and 110cc dirt bikes with electric [More Info]
30A9370
$64.99
Stator / Magneto Coil - GY6-12 12 Coil. Approximate dimensions:
[More Info]
10A8140
$74.99
Left switch assembly. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A8405
$15.99
E Bike & electric scooter switch - Headlight Hi/Low beam. Applies to common scooter brands such as high/low switch for Gio 500W and 800W scooters, Tao Tao scooters etc. [More Info]
30A1020
$69.99
Starter Motor, RV 180. SYM 180/200 GTS/HD/RV. Clockwise rotation with 9 splines.
[More Info]
30A1220
$69.99
This starter motor unit with 10 splines or teeth is typically found in the Starter Motor section of several part manuals. Commonly used for but not limited [More Info]
This CDI box / igniter fits many models and makes of ATVs, dirt bikes, go karts, scooters and other motorized products. Most commonly used for the Jianshe JS250 and Baja Wilderness Trail 250 (WD250-U) ATV - Vin Prefix LLCL. [More Info]
10A8810
$19.99
Rear brake cable switch most commonly (though not exclusively) used to activate the brake lights on many variations of smaller ATVs from 50cc to 300cc as well as some dirt bikes, go karts, buggies etc. [More Info]
10A4265
$29.99
This ignition key switch fits many 50cc to 250cc machines. It is a 4 wire key switch with a 4 pin male connector(white). Includes 2 keys. Works on ATVs, Dirt Bikes, Scooters, and more. [More Info]
10A5055
$129.99
This 1x2pin + 1x4pin CDI is used for a wide displacement range of ATVs and UTVs. Most popularly applies to 400cc ATVs and UTVs from companies like Odes and Liangzi. [More Info]
10A8750
$39.99
Horn Switch - Push Button, 2 blade connectors. This steering wheel mounted push horn is most commonly used for (but not limited to) Chironex Spartan 500cc and 600cc UTVs (4x4/2x4 and similar variations), Xinyang 500cc - 600cc ATVs and UTVs [More Info]
30A9530
$74.99
Magneto Cylinder - Yamaha PW50. Commonly used for (but not limited to) direct replacement magneto cylinder for PW50 (Yamaha Pewee 50) and other similarly configured kids or youth machines. [More Info]
10C5610
$49.99
This is a 24V, 12A, brush / brushed controller.
Voltage: 24V, Electric Current: 12±1A, Embedded Voltage: 21.5±1V.
Case dimensions are 8.2cm x 4. [More Info]
10A9055
$19.99
This charger plug is common (though not exclusively) used for electric scooters in the 150W, 250W, 350W, 500W, 800W range. Popularly for the 350W and 500W Razor electric scooters. [More Info]
This CDI (7500 RPM) is typically found in the Electrical System section of several part manuals. Commonly used for but not limited to LH170MM / LH173MN / VM170MM / VM173MN / SOHC / 250cc, 260cc, and 300cc engines. [More Info]
10C5642
$89.99
This is a 48V, 17A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and mobility scooters. [More Info]
10A7195
$349.99
ECU control cable / ECU wiring harness assembly for 500cc, 550cc EFI (Electronic Fuel Injected) ATVs. Most commonly used for (but not limited to) Chironex Bandito 550cc EFI ATV, GIO Rock Liner 550cc EFI ATV, Buyang 550cc EFI ATV as well as [More Info]
This ignition coil cable / spark plug cable is commonly used for a wide range of ATVs and UTVs. Most popularly applies to the Odes and Kangdi (Kandi) 800cc UTVs. [More Info]
10A9480
$249.99
This dump box actuator / raiser / lifter is commonly used for a wide range of ATVs and UTVs. Most popularly applies to the Odes and Kangdi (Kandi) 800cc UTVs. [More Info]
Control Relay / 14V 60/80A. Most commonly used for (but not limited to) 260cc and 300cc liquid cooled ATV's, UTVs, dirt bikes / pit bikes, scooters, dune buggies, go karts and other similar products. [More Info]
10A6080
$139.99
Rectifier (voltage regulator). Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs and Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A6036
$39.99
This Rectifier (Voltage Regulator) applies to (and is not limited to) Yamaha TTR250 dirt bikes as well as other interchangeable models and clones. [More Info]
10A6042
$109.99
Rectifier (aka Voltage Regulator). Most commonly used for (but not limited to) 400cc ATVs such as the Jianshe JS400 Mountain Lion as well as many other clones, rebrands and similar displacement machines. [More Info]
60A9204
$8.99
Violet 3 amp 32 volt regular blade fuse (ATO) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J1284, JASO D612, ISO 8820-3 and QC/T 420. [More Info]
10A1705
$26.99
Round (cylindrical) 3 wire flasher relay (turn signal relay, aka blinker relay). This relay commonly applies to (and is not limited to) 49cc to 300cc ATVs, dirt bikes, go karts/buggies, golf carts, scooters as well as other powersports, recreational [More Info]
This water temperature sensor/ thermoswitch / thermostat transducer (1.2K Ohm) is commonly used for but not limited to 125cc, 150cc, 250cc, and 500cc engines. [More Info]
60A9520
$11.99
Circuit Breaker - Push Button, 20A, ST-1, 125/250VAC, 32VDC [More Info]
10A6880
$299.99
Main cable assembly. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
80A9750
$199.99
Intake air temperature / pressure sensor. Commonly used for (but not limited to) 400cc, 500cc, 700cc and 800cc engines, such as the Hisun 400cc, Hisun 500cc, Hisun 700cc and Hisun 800cc 4x4 ATVs and Hisun 400cc UTVs, as well as many other clones, [More Info]
10A8620
$15.99
Common turn signal switch for many scooters, ebikes, mobility scooters and other electric vehicles. [More Info]
10C6055
$169.99
This is a 60V, 24T, 55A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
10C7250
$199.99
This is a 60V-72V, 180A/50A, 800W-1500W controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
Electric Motor & Wheel Assembly, 36V, 500W. Direct replacement for SHOK Scooters Proton kick scooter (years 2021-2022) as well as many other brands and models. [More Info]
Electric Motor & Wheel Assembly (wide profile rim and 9" tire), 48V, 800W. Direct replacement for SHOK Scooters Graviton kick scooter as well as many other brands and models. [More Info]
30A9414
$239.99
Stator / Magneto coil assembly. 18 coil, 3 wire, single plug 3-pin. Commonly used for (but not limited to) a wide range of models including the following engine [More Info]
70S9387
$119.99
70S9382
$26.99
Pedal assist sensor (PAS) / step frequency speed sensor. Direct replacement for SHOK Scooters Triode fat tire trike / 3-wheel electric bike (e-bike) and Nova step-through (step-thru) electric city bike / e-bike as well as many other brands and [More Info]
30A1110
$79.99
Starter 200cc, 250cc engine. Works on almost all 200cc-250cc Chinese engines 11 Teeth. Body of starter is 10cm long with a diameter of 6.5cm. [More Info]
10A2520
$29.99
This Starter Relay / Starter Solenoid commonly applies to (and is not limited to) 50cc 70cc 90cc 110cc 125cc 150cc 200cc 250cc up to 500cc electric start engines. [More Info]
30A9345
$69.99
Stator / Magneto Coil - CB8. Approximate dimensions:
[More Info]
30A9380
$64.99
Stator / Magneto Coil - CG12. Approximate dimensions:
[More Info]
Ignition coil cable / spark plug cable. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc 4x4 ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A8610
$15.99
E Bike & electric scooter switch - Turn Signal. Applies to common scooter brands such as turn signal switch for Gio 500W and 800W scooters, Tao Tao scooters etc. [More Info]
30A1040
$69.99
Starter, counter clockwise rotation with 10 splines. A fairly universal design most commonly (though not exclusively) used for the smaller Polaris ATVs (Sportsman 50, Sportsman 90, Scrambler 50), Yamaha ATVs (Raptor 50) as well as a vast number [More Info]
30A1230
$69.99
ATV/Scooter Starter Motor, Magesti-250. YMH Majesty 250. Clockwise rotation with 9 splines.
[More Info]
Rectifier (voltage regulator) for the Baja Wilderness Trail 250 (WD250-U) ATV with vin prefix LLCL. Compatible with (but not limited to) 250cc engines. [More Info]
10A9050
$19.99
This charger plug applies to a wide variety of electric scooters and other machines. Receptacle is a three prong that the scooter charger plugs into. [More Info]
10A6045
$89.99
Rectifier (voltage regulator) - 400cc Range. Total case dimensions are 10.8cm x 8.2cm x 3.7cm. This rectifier / voltage regulator is most commonly used for (but not limited to) Odes 400cc ATVs, Odes 400cc UTVs, Liangzi 400cc ATVs (4x4/2x4 and [More Info]
10A8300
$39.99
Power Switch - Main Power Switch. This main power switch is most commonly used for (but not limited to) Chironex Spartan 500cc and 600cc UTVs (4x4/2x4 and similar variations), Xinyang 500cc - 600cc ATVs and UTVs (4x4/2x4 and similar variations).
Common [More Info]
10A2028
$39.99
Ignition Coil - Yamaha PW80. G80-F30-01
[More Info]
Actuation switch, left hand side. Most commonly used for (but not limited to) 50cc to 300cc ATVs, Dirt Bikes, buggies and scooters. This switch has a large variety of uses though primarily used with a brake lever in order to actuate the brake [More Info]
10C5625
$89.99
This is a 36V, 18A, brush / brushed controller. Voltage: 36V, Power: 500W, Electric Current 35/18A. Case dimensions are 9.3cm x 6.5cm x 3.1cm (LxWxH). [More Info]
10A4270
$39.99
This metal ignition key switch features a 4 pin male connector (white) and includes 2 keys. Commonly (though not exclusively) used for Vento Zip style scooters. [More Info]
60A9208
$8.99
Brown 7.5 amp 32 volt regular blade fuse (ATO) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J1284, JASO D612, ISO 8820-3 and QC/T 420. [More Info]
10C5643
$89.99
This is a 48V, 17A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
10A7095
$169.99
Fuse box commonly (but not exclusively) used for 600cc, 800cc, 1000cc and 1100cc engines. Applies to many brands and displacements of ATVs, UTVs and buggies. [More Info]
10A7340
$249.99
Instrument cluster / instrument panel. Commonly used for (but not limited to) 400cc engines, such as the Hisun 400cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
This ignition coil cable / spark plug cable is commonly used for a wide range of ATVs and UTVs. Most popularly applies to the Odes and Kangdi (Kandi) 800cc UTVs. [More Info]
10A4570
$299.99
4WD relay / 4 wheel drive solenoid. Most commonly used for (but not limited to) 260cc and 300cc liquid cooled ATV's, UTVs, dirt bikes / pit bikes, scooters, dune buggies, go karts and other similar products. [More Info]
10A1540
$59.99
Auxilary relay. Commonly used for (but not limited to) 400cc, 500cc and 700cc engines, such as the Hisun 500cc and Hisun 700cc 4x4 ATVs and Hisun 400cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A6016
$39.99
This rectifier (voltage regulator) is typically found in the Electric System section of several part manuals. Commonly used for but not limited to 125cc engines. [More Info]
10A8144
$109.99
Handlebar left switch assembly. Most commonly used for (but not limited to) 400cc ATVs such as the Jianshe JS400 Mountain Lion as well as many other clones, rebrands and similar displacement machines. [More Info]
60A9202
$8.99
Grey 2 amp 32 volt regular blade fuse (ATO) constructed with PE66 and zinc alloy terminals. 10 pieces. Complies with SAE J1284, JASO D612, ISO 8820-3 and QC/T 420. [More Info]
10A1705
$26.99
Round (cylindrical) 3 wire flasher relay (turn signal relay, aka blinker relay). This relay commonly applies to (and is not limited to) 49cc to 300cc ATVs, dirt bikes, go karts/buggies, golf carts, scooters as well as other powersports, recreational [More Info]
10A8002
$24.99
Switch - Scooter, Horn, Turn Signal, Headlight [More Info]
60A9525
$11.99
Circuit Breaker - Push Button, 25A, ST-1, 125/250VAC, 32VDC [More Info]
10A1480
$199.99
10A7400
$54.99
Gear indicator sensor. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc UTVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10A4281
$79.99
Ignition Switch / Ignition Key Switch. Commonly used for (but not limited to) 800cc engines, such as the Hisun 800cc ATVs, as well as many other clones, rebrands and similar displacement machines. [More Info]
10C6070
$309.99
This is a 60V, 30T, 70A controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
10C1210
$369.99
This is a 60V-120V, 220A/100A, 1000W-2000W controller. These types of controllers are commonly (though not exclusively) used for E-bikes, electric scooters and electric mobility scooters. [More Info]
Electric Motor & Wheel Assembly, 36V, 350W. Direct replacement for SHOK Scooters Neutron kick scooter as well as many other brands and models such as Segway Ninebot and Xiaomi. [More Info]
Display control board and wires for the handlebar mounted LCD instrument panel. Cover plate sold separately. Direct replacement for SHOK Scooters Graviton kick scooters as well as many other brands and models. [More Info]
Controller 48V, 20A. Intelligent vector sine wave. Direct replacement for SHOK Scooters Pulsar fat tire folding step-through ebike as well as many other brands and models. [More Info]
70S9488
$449.99
Electric motor, 48V, 500W, Mxus profile. Direct replacement for SHOK Scooters Nova step-through (step-thru) electric city bike / e-bike rear wheel motor as well as many other brands and models in the open market. [More Info]
70S9382
$26.99
Pedal assist sensor (PAS) / step frequency speed sensor. Direct replacement for SHOK Scooters Triode fat tire trike / 3-wheel electric bike (e-bike) and Nova step-through (step-thru) electric city bike / e-bike as well as many other brands and [More Info]